Where is the fuel pump on a GMC Yukon?
When the straps are removed the rear of the tank will drop down to the ground. When the fuel lines are disconnected, the tank should be slid back and the front will drop. The fuel pump can now be accessed. How to connect the wires of the GMC fuel pump/sender on a 2003 Yukon?
What causes a GMC fuel pump to fail?
When the level of fuel in the tank is below ΒΌ it causes the pump to run hot and driving regularly in this condition can lead to early pump failure. A defective GMC fuel pump can affect the performance of the vehicle and even bring it to a standstill.
What to do if your fuel pump does not work?
Keep the accelerator pedal fully pressed while cranking the engine to bleed the system. If this does not work, then it could be that the fuel filter will need to be bled. This can be done by powering up the fuel pump fuse. To do this, locate the small holder in the cover on the right side of the firewall.
When the straps are removed the rear of the tank will drop down to the ground. When the fuel lines are disconnected, the tank should be slid back and the front will drop. The fuel pump can now be accessed. How to connect the wires of the GMC fuel pump/sender on a 2003 Yukon?
Why is my GMC fuel pump not working?
First, ensure the GMC fuel pump being used is either an AC Delco or Delphi. When the pump is being replaced, if the tank is not cleaned of rust, dirt or debris, it could be getting passed the screen and clogging the new filter. A clogged fuel filter will pump extra strain on the fuel pump, reducing its operational life.
Why does fuel gauge read wrong after fuel pump replaced?
Fuel gauge reads wrong after fuel pump replaced – YouTube If you have a 96 or 97 year gm truck that needs a fuel pump, be sure to order it by the VIN. There is an option for a anti-slosh module that could cause you If you have a 96 or 97 year gm truck that needs a fuel pump, be sure to order it by the VIN.
What is the fuel pump relay wiring diagram?
Fuel Pump Relay Wiring Diagram (Automatic Trans. Only) NOTE: The illlustrations and info in this page apply only to 1994 Chevrolet/GMC pickups with a 4.3L, 5.0L or a 5.7L engine. For the 1993 fuel pump wiring diagram, check out the following article: 1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L).
How to install new GM wire harness on fuel pump module?
If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: WfYJuntPOgNiQAf9)
How does a GMC fuel pump get out of the tank?
Alternatively, the lines at the front of the tank can be released by squeezing the plastic lock with pliers. Below is a picture. When the straps are removed the rear of the tank will drop down to the ground. When the fuel lines are disconnected, the tank should be slid back and the front will drop. The fuel pump can now be accessed.