Where is the PCV valve located on a 2010 Chevy Silverado?
Open the hood of the Silverado and locate the PCV valve on the driver side rear corner on top of the valve cover. The valve cover is positioned behind the spark plug distributors. The valve is connected to a thick hose and is seated in a rubber grommet.
What can clog a PCV valve?
(PCV) System – One Of The Biggest Causes, Of Engine Oil Sludge
- Because, without air flow, moisture contamination remains and a sludge buildup is often a result.
- If the engine has a leaky oil pan, valve cover, intake manifold gasket, or crankshaft seals; it will not be able to develop much vacuum in the crankcase.
Is there a valve cover for a 2006 Silverado?
There is a replacement aftermarket valve cover from Dorman that can remedy the problem with a revised PCV system. However, there is a $130.00 price tag for it! If spending that much on a valve cover bothers you, you can remove the stock cover and use a engine cleaner to soak it and clean with a rag.
Where is the PCV valve on a Chevy Silverado?
Park the Silverado on a level surface. Allow the truck to cool down for a half hour before beginning any maintenance under the hood. Open the hood of the Silverado and locate the PCV valve on the driver side rear corner on top of the valve cover. The valve cover is positioned behind the spark plug distributors.
What kind of valve cover for Chevy Suburban?
Upgraded Valve Cover Works!!! Just finished installing this Dorman 264-969 Driver Side Valve Cover on my 2007 Chevy Suburban with 5.3L engine. This product is well made and fit my truck beautifully. This product is the upgraded design with the relocated square baffle for the pcv vent to minimize the excessive oil consumption issue.
What kind of valve does a Silverado 5.3 have?
The Silverado comes equipped with different sized motors, including the V5300 5.3L V8 engine. The vehicle is equipped with a positive crankcase ventilation (PCV) valve. The valve has the primary responsibility of removing gases from the exhaust, to reduce pressure buildup in the engine crankcase.
There is a replacement aftermarket valve cover from Dorman that can remedy the problem with a revised PCV system. However, there is a $130.00 price tag for it! If spending that much on a valve cover bothers you, you can remove the stock cover and use a engine cleaner to soak it and clean with a rag.
How do you put a Dorman valve cover on a Silverado?
Installing the Dorman valve cover (or the cleaned original) is as easy as reversing the steps you took to take it off. Clean the gasket mating surface on the Cylinder head. Slide the cover back on. Tighten the four bolts that hold the cover on. Tighten these to specified torque specs (8 Ft-Lbs).
How to update Valve cover on Chevy Tahoe?
I’m leaning towards borrowing an updated valve cover from the parts store for measuring and studying. Then just cutting a square hole in the baffle of my stock valve cover with a rotary tool and using the removed piece to weld up the original hole, essentially copying the updated design.
What kind of valve cover do I need for a Chevy Escalade?
Details Driver Side Valve Cover with Gaskets – Compatible with 4.8L 5.3L 5.7L 6.0L 6.2L Cadillac Escalade, Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon – Replace 12570427 264-965 In Stock. In Stock. In Stock.