Why is my transmission down shifting hard?
Transmission Fluid Low or Poor Condition – Vehicles low on transmission fluid or that are operating with worn out or contaminated fluid are likely to experience hard shift conditions. Lack of adequate lubrication within the transmission can cause several problems, including hard shifting.
How bad is the MT82 transmission?
Those complaints include claims that inherent defects cause the Ford MT82 transmission to slip, jerk, engage harshly, clash gears, suffer premature wear, and eventually fail. At that time, the NHTSA found 364 complaints related to the transmission, especially in cold temperatures.
What is Ford No Lift Shift?
The no-lift shift function is often used with a Launch Control combined. The driver can go full throttle when the start is stopped and the Launch Control registers the clutch actuation. As with the no-lift shift function, the speed is also regulated to an adjustable level with the Launch Control.
What happens when you change the gears on a Mustang?
A set of 4.10 gears will also result in a decrease of your top speed which is why they can also be referred to as shorter gears. Replacing a Mustang’s stock rear gears with a higher ratio will give you quicker acceleration, greatly improving your 60 foot times–depending on what ratio you choose
Where do you find the gear ratio on a Mustang?
You can also find the gear ratio stamped into the differential cover or written on to it from the factory, but these aren’t always visible and can be difficult to locate. Using a VIN decoder can help and as a last resort you can go to a dealer and have them check to tell you.
What are the benefits of rear differential gears?
A guide to help you understand the uses and benefits behind your Mustang’s rear differential gears. Changing these gears will have a positive effect on both acceleration and fuel efficiency, depending on the ratio you choose.
What’s the difference between lower gears and higher gears?
People upgrade to numerically higher gears because increasing this number gives your engine more leverage and makes it easier to accelerate faster. Higher gears, such as 4.10 gears, can be referred to as a steeper gear. A set of 4.10 gears will also result in a decrease of your top speed which is why they can also be referred to as shorter gears.