How do you change a low pressure ac sensor?
- Step 1: Locate the A/C pressure switch.
- Step 1: Disconnect the negative battery cable.
- Step 2: Remove the switch electrical connector.
- Step 3: Remove the switch.
- Step 1: Install the new switch.
- Step 2: Reinstall the electrical connector.
- Step 3: Reinstall the negative battery cable.
- Step 4: Test the A/C.
Where are the low and high AC pressure switches located?
The low-pressure side switch is found before the AC compressor, while the high-pressure switch comes after the compressor. Most AC pressure switches are found within the engine compartment, but some manufacturers put them elsewhere. A look in your service manual will show you the appropriate location for your model. AC Pressure Switch Function
What does the low pressure switch on a Chevy do?
The low-pressure switch is designed to shut the compressor down if the pressure becomes to low or the evaporator freezes. The oil for the compressor is suspended in the Freon, and if a leak in the system occurs, the oil, being heavier than the Freon, will be the first thing to leak out.
When to change AC low side high side low pressure?
Similarly, the fan also has to spin when you turn the system on. When all of these components appear to work fine and the AC low side high, high side low problem persists, you may need to change the compressor to fix the unit. However, it is always better to consult a mechanic before deciding to replace any part.
When to use high or low pressure switch?
The high-pressure switch is designed to shut down the compressor if the line pressure gets dangerously high. This will usually happen when a condenser fan fails. The low-pressure switch is designed to shut the compressor down if the pressure becomes to low or the evaporator freezes.
The low-pressure switch is designed to shut the compressor down if the pressure becomes to low or the evaporator freezes. The oil for the compressor is suspended in the Freon, and if a leak in the system occurs, the oil, being heavier than the Freon, will be the first thing to leak out.
Where is the low side high side low pressure switch?
The switch is located near the expansion valve. Use an Ohmmeter to find if it is giving the correct reading. Also, check if the compressor clutch engages and rotates the compressor when the AC is on. Similarly, the fan also has to spin when you turn the system on.
Why is there a high and low pressure switch on an AC unit?
Air conditioning pressure switches are designed to protect the A/C system against pressure that is too high or too low. There are both high pressure and low pressure switches; some vehicles are equipped with just a high pressure switch while others have both. Incorrect pressure can damage the compressor, hoses, and other A/C system components.
Where is the pressure switch on an A / C?
Filter your results by entering your Year, Make, Model to ensure you find the parts that fit your vehicle. The A/C pressure switch is mounted on both the high and low sides of your A/C. When the pressure in your A/C rises or lowers too much, this switch turns off the compressor to protect it and the rest of the system from damage.