How do you remove an axle key?
The normal way to remove the key is to use a small cold chisel to impact the edge of the key in order to force it from its slot in the shaft. The exposed end of the key can be ground with a die grinder so that a “v” grove is formed in the end of the key.
What is the difference between a transmission and a transaxle?
In short, a transaxle performs both the gear-changing function of a transmission and the power-splitting ability of an axle differential in one integrated unit. A transmission performs the gear-changing function only, delivering power via a single output shaft at the back of the unit.
What is an axle key?
Axle shaft keys or just “axle keys” are essential pieces of hardware when keeping a drive wheel tight against a revolving shaft. The key fits into a keyway, the rectangular slot that is milled into both the shaft and hub. In addition, “keyway” should only refer to the milled slot into which the key fits.
How do you reinstall a craftsman rear wheel?
Press the key into the axle until resistance is felt. The square key is a metal part that resembles a pin, but is square instead of round. Slide the second washer and C-retaining ring onto the axle. Place the axle cover on the end of the axle and tap it on firmly with a rubber mallet.
How do you lock the rear wheel on a craftsman lawn mower?
It locks the wheel into the axle for the rear-wheel drive train to push the lawn mower. Slide the rear wheel spacer followed by one washer onto the rear axle. Align the grooves in the rear wheel with the grooves in the rear axle, and slide the repaired tire and wheel onto the axle.
Where is the square key on a craftsman rear wheel?
Insert the square key into the slot in the axle’s top behind the wheel. Press the key into the axle until resistance is felt. The square key is a metal part that resembles a pin, but is square instead of round.
How to reinstall rear wheel with a key?
Slide the rear wheel spacer followed by one washer onto the rear axle. Align the grooves in the rear wheel with the grooves in the rear axle, and slide the repaired tire and wheel onto the axle. Insert the square key into the slot in the axle’s top behind the wheel. Press the key into the axle until resistance is felt.