How do you replace the oil cooler line?
With the correct seals installed on the replacement oil cooler lines, go ahead and install them onto the oil cooler. Once installed, go ahead and reinstall the retaining hardware. Step 11: Install replacement oil cooler lines onto the engine side. Reinstall the replacement oil cooler lines onto the end that get mounted to the engine.
What are the pros and cons of an engine oil cooler?
Position the oil cooler can be covered up, and it can, for the most part, be mounted into even the most cramped engine compartments. The main negative part of utilizing an engine oil cooler is the requirement for more oil, up to two quarts more for each oil change, in light of the oil required to fill the curls and lines.
How is the oil cooler connected to the engine?
Excessive heat leads to the oil breaking down and losing its ability to cool and lubricate. These vehicles also typically include an oil cooler that gets mounted in the front to help keep the oil temperature down. These oil coolers are connected to the engine by oil cooler lines, which carry the oil between the cooler and the engine.
Can a truck be fitted with an oil cooler?
Oil coolers are high increases to trucks and RVs, as these substantial vehicles put more strain on the typically small drive prepare. The cooler can be immediately introduced in these vehicles because most residential motors and transmissions are fitted to acknowledge the oil cooler by the outline.
Insert the replacement plastic fitting into the fitting manually. Run the replacement oil cooler line from the radiator to the oil filter housing and push it into the plastic clip on one end, and tighten it down using the line wrench on the other. Repeat Steps 3-5 for the other oil cooler line.
Can a trans cooler line be replaced on a truck?
I did both the trans cooler lines on my 2010, and it was a pain and I wouldnt DIY it again, I’d just pay someone with a lift. I bought the oil cooler lines too but never got around to doing them before I sold the truck. You have to pull the axle to do the oil cooler lines (at least on the NNBS), which is why I never did it.
How does an oil cooler work on a Chevy truck?
On a Chevrolet V8 engine, the engine can heat up to some high temperatures. One of the ways the manufacturer minimizes heat is by installing an oil cooler that drops the temperature of the oil while it circulates through the engine.
Is there a leak from the oil cooler?
While changing oil tonight I noticed that there appears to be a light leak coming from one of the hoses between the radiator and the engine. I’m 99% sure it’s an engine oil cooler line (not transmission cooler).
Do you have to replace an engine oil cooler line?
From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. Anyone ever have to replace an engine oil cooler line?
How do you get the oil cooler out of the engine?
Follow the oil line to the oil filter, and unbolt the bracket that holds the oil lines to the engine using the 3/8-inch ratchet and socket. Then push in the plastic clip on the oil filter assembly to release the line. Unscrew the fitting from the oil cooler housing using the 3/8-inch ratchet and socket.
Where does the oil cooler line come from?
Most of the leak I see is under the radiator and condenser. The leak from the oil line is minimal at this point. Oil cooler line leak. If you decide to do them, see if 20828695 is still compatable… I’ll give you a great deal haha
While changing oil tonight I noticed that there appears to be a light leak coming from one of the hoses between the radiator and the engine. I’m 99% sure it’s an engine oil cooler line (not transmission cooler).
Insert the replacement plastic fitting into the fitting manually. Run the replacement oil cooler line from the radiator to the oil filter housing and push it into the plastic clip on one end, and tighten it down using the line wrench on the other. Repeat Steps 3-5 for the other oil cooler line.
How do you get oil out of a radiator?
Unscrew an oil cooler line from the radiator using the line wrench. This will spill out some oil, so you may want to keep the drain pan handy. Follow the oil line to the oil filter, and unbolt the bracket that holds the oil lines to the engine using the 3/8-inch ratchet and socket.
What happens if you break the oil cooler line?
One of the ways the manufacturer minimizes heat is by installing an oil cooler that drops the temperature of the oil while it circulates through the engine. Of course, if the lines to the oil cooler break or blow, you’ll lose oil and could potentially damage or seize up the engine.
How do you change the oil line on a Chevy truck?
Follow the oil line to the oil filter, and unbolt the bracket that holds the oil lines to the engine using the 3/8-inch ratchet and socket. Then push in the plastic clip on the oil filter assembly to release the line.