How do you reset the oil life on a 2021 GMC Yukon?
Reset Guide: GMC Yukon Oil Life Oil Change Light (2000-2021)
- Place the ignition to the RUN position without starting the engine.
- Fully depress the GAS pedal, three times within 5 seconds.
- Turn off the ignition.
- Verify the indicator has been reset by starting the engine.
How does the Yukon oil change system work?
This feature displays the estimated percentage of oil life remaining (on the odometer cluster) and notifies you when the Yukon is due for an oil change. After each oil change, you’re required to reset the system, unless you want to see the “Change Oil” message and hear the warning chime each time you start your engine.
How to reset your Chevy or GMC oil change light?
Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.
Do you reset the oil light when you change the oil?
Do not reset the oil light unless you have actually changed the oil. The light is there to tell you when it’s time to change the oil. Resetting the light without changing the oil may cause you to miss an oil change, which can damage your engine. Turn the car’s systems on, but leave the engine off.
How to reset the oil change indicator system?
After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below: Step 1: Insert key into the ignition and turn key to “ON” without starting the engine. Step 2: Slowly depress…
This feature displays the estimated percentage of oil life remaining (on the odometer cluster) and notifies you when the Yukon is due for an oil change. After each oil change, you’re required to reset the system, unless you want to see the “Change Oil” message and hear the warning chime each time you start your engine.
Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.
How do I Reset my oil system after an oil change?
After each oil change, you’re required to reset the system, unless you want to see the “Change Oil” message and hear the warning chime each time you start your engine. Press the lower button on the left side of your steering wheel (fuel tank symbol) until the odometer screen changes to “Oil Life Remaining.”
How do you reset the oil light on a Honda Accord?
While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.