How do you start a Polaris Sportsman 500?

How do you start a Polaris Sportsman 500?

Starting the Engine

  1. Position the vehicle on a level surface outdoors or in a well-venti- lated area.
  2. Place the transmission in PARK.
  3. Lock the parking brake.
  4. Turn the fuel valve on.
  5. Sit on the vehicle.
  6. Do not use the choke if starting a warm engine.
  7. If the engine is cold, pull the.
  8. If the knob doesn’t stay where.

Are all Polaris bolt patterns the same?

Polaris: All Modern full sized ATV & SxS’s are 4/156 bolt pattern. Honda: All non-sport ATV’s and SxS’s are 4/110 with the exception of the Pioneer 1000 and Talon. They use 4/137 bolt pattern. Can-Am: All modern ATV and SxS’s are 4/137 bolt pattern.

How do you push start a quad?

The most common way to push start a vehicle is to put the manual transmission in second gear, switching the ignition to on/run, depressing the clutch, and pushing the vehicle until it is at a speed of 5 to 10 mph (8 to 16 km/h) or more, then quickly engaging the clutch to make the engine rotate and start while keeping …

When did the Polaris Sportsman 500 come out?

Founded in 1954, Polaris Industries first began manufacturing ATVs (all-terrain vehicles) in 1985. This gave the company over 25 years of ATV experience when it released a new model of the Sportsman 500 for 2011.

What to do if your Polaris Sportsman 500 wont start?

The Polaris Sportsman 500 is a quad designed to haul gear, animals and riders for back country activities. If your Sportsman 500 is giving your problems with starting, there are three areas to concentrate on for troubleshooting. Look at the fuel, spark and battery systems to get the quad back up and running.

What should battery voltage be on Polaris Sportsman 500?

If the engine runs irregularly, stalls or misfires, it is possible that there are dirty or defective spark plugs, which must be inspected, cleaned or replaced accordingly. It is also possible that there is low battery voltage. The 2011 Scrambler 500 battery must be charged to 12.8 VDC.

When to see a Polaris dealer for a problem?

If there are defective spark plugs or no spark is going to them, then the spark plugs should be inspected and replaced as necessary. For three other potential problems (a clogged fuel filter, water/fuel in the crankcase or mechanical failure), Polaris recommends that owners see a Polaris dealer.

Are there any problems with the Polaris Sportsman 500?

Polaris designed this utility ATV for hunting and trail riding, and the company offers a number of troubleshooting tips for common problems that may arise. If the engine does not turn over, Polaris suggests three potential problems and solutions. First, there may be low battery voltage, and owners should try to recharge the battery to 12.8 VDC.

Why is my sportsman 500 Ho not working?

If you still can’t pull the cord, Take the spark plug out and try it. Some of the 04’s (mine) had factory problems with one of the wires going to the distributor. At that plant they ran it in the wrong place and it got kinked.

What to do if your Polaris Sportsman won’t start?

As suggested, pull the spark plug and clean it (is it wet) ( do you have spark), pull air box cover and look for mice nest, then try to see if will run with a shot of ether in the carb. Whitehall Wi. Mine likes to eat spark plugs first thing I would do is change the plug.

If there are defective spark plugs or no spark is going to them, then the spark plugs should be inspected and replaced as necessary. For three other potential problems (a clogged fuel filter, water/fuel in the crankcase or mechanical failure), Polaris recommends that owners see a Polaris dealer.