How do you use a Decalc Philips steam iron?

How do you use a Decalc Philips steam iron?

Easy De-Calc Function

  1. Unplug and let it cool completely — at least 2 hours.
  2. Place the steam generator at the edge of a table or sink. Hold a cup (at least 350 ml) under the EASY DE-CALC knob.
  3. Remove the knob.
  4. Put the knob back in place and turn clockwise to tighten.
  5. You are now ready to keep ironing!

Why does my steam iron not work?

There may not be enough water left in the tank. Your iron needs to get hot enough to turn water into steam. Give your iron a few minutes to heat up before using it. Check your user manual and make sure that you’re using your iron at a temperature setting that is hot enough for the steam function.

How do you unclog a steam generator iron?

Pour vinegar into the water reservoir and steam for up to 15 minutes then repeat the process with water to get rid of the limescale and vinegar. Vinegar can also clean the outside of your iron.

How do you use Decalc iron?

Manually descaling Fill the water tank to the maximum amount with water. Turn the iron to the highest setting for at least 4 minutes. Press the steam button a few times. Turn off the iron and let the water soak for 30 minutes.

How do you use Philips Decalc?

When the DE-CALC light flashes, it’s time to descale. For best results, you can do this as part of your regular ironing routine.

  1. Unplug and let it cool completely — at least 2 hours.
  2. Place the steam generator at the edge of a table or sink.
  3. Remove the knob.
  4. Put the knob back in place and turn clockwise to tighten.

How do you Decalcify a Philips steam iron?

All Philips steam irons

  1. Fill the water tank and turn on.
  2. When the light goes out, unplug and hold the iron over the sink so the soleplate is horizontal.
  3. Activate CALC CLEAN using the button or selector.
  4. Shake the iron gently back and forth until empty.
  5. Heat the iron and glide over a cloth to clean the soleplate.