How to mount a tail light on a Nissan Frontier?
Line up the two bolt threads on the back of the light housing with their corresponding holes in the roof. Push the tail light housing straight on to the roof of the truck. Move to the rear seats of the passenger cabin. Loosely attach the 8mm nut to the end of the 8mm socket with some painter’s tape to hold it in place.
What do I need to replace light bulbs on my Nissan Frontier?
The tools needed to access and replace the light bulbs include a plastic pry bar tool, a deep well 8mm or 5/16″ socket, a short extension bar and a 1/4″ drive ratchet. The first step is to sit in the back row of seats of your Frontier.
How to remove the tail light assembly from a Nissan pickup?
Remove the light sockets at the back of the taillight assembly, but mark them in order to replace them correctly when you replace the taillight assembly. Turn the sockets 1/4 turn counterclockwise to release them from the assembly.
What is the third brake light on a Nissan Frontier?
Pull the old bulb straight out of the socket. If the old light was recently turned on, be careful since it might still be hot enough to burn your fingers. Push a new # 912 bulb straight in to the socket. If you want to have brighter cargo area lights or a brighter third brake light, choose an LED bulb.
Line up the two bolt threads on the back of the light housing with their corresponding holes in the roof. Push the tail light housing straight on to the roof of the truck. Move to the rear seats of the passenger cabin. Loosely attach the 8mm nut to the end of the 8mm socket with some painter’s tape to hold it in place.
Where is the tail light assembly on a Nissan Titan?
On the newer Frontier and Titan models they will be located on the inside corner of the bed. On Frontier models with the optional bed extender gate, remove the brass hinge screws. Wiggle the taillight assembly free. The assembly is still affixed to the truck with plastic guide pins that need to be wrangled from their sockets.
When to replace the Frontier tail light assembly?
When that happens, quick replacement from AutoZone is all you need to keep your Frontier in peak condition. While the Frontier tail lamp assembly is a fast repair, it is still an important one.
The tools needed to access and replace the light bulbs include a plastic pry bar tool, a deep well 8mm or 5/16″ socket, a short extension bar and a 1/4″ drive ratchet. The first step is to sit in the back row of seats of your Frontier.
What kind of Fuse do I need for my Nissan Frontier?
Owners of other Nissan or Infiniti vehicles such as the Navara, Versa, Maxima, Juke, Rogue, Altima, Xterra, Pathfinder, Murano, Cube, Armada, Leaf, Quest, Sentra, Teana, 370Z, GT-R, Titan, G25, G37, M35, QX56, QX60 and M37 may also find these DIY instructions to be helpful.