Is the seat belt warning or door chime working?
When the turn signal is on, it flashes but there is no sound. Similarly there is no sound for the seat belt warning or door chime. Also, the front speakers do not work. Occasionally, the speakers will start working or the turn signal will work, but 99% of the time they do not work.
What to do if your Bose door chime is not working?
1. If equipped with a Bose. amplifier, remove the radio amp fuse located under the hood electrical center. 2. Remove the floor console bezel. 3. Remove the cupholder. 4. Remove the bolts (1) retaining the console to the instrument panel (I/P). 5. Remove the console storage bin. 6. Remove the center console end panel. 7.
What should I do if my Radio is not working?
SPEAKERS INOPERATIVE – ONE OR MORE PRELIMINARY INFORMATION Perform the Diagnostic System Check – Radio, Stereo and Compact disc. See: Radio, Stereo, and Compact Disc > Initial Inspection and Diagnostic Overview > Diagnostic System Check IMPORTANT: The following information lists the most probable cause of the concern to the least probable cause.
How to test the RPO uq7 door chime?
With RPO UQ7 1. Battery positive voltage circuit to the amplifier open. Test the battery positive voltage circuit to the amplifier for an open. 2. Ground circuit to the amplifier open.
When the turn signal is on, it flashes but there is no sound. Similarly there is no sound for the seat belt warning or door chime. Also, the front speakers do not work. Occasionally, the speakers will start working or the turn signal will work, but 99% of the time they do not work.
1. If equipped with a Bose. amplifier, remove the radio amp fuse located under the hood electrical center. 2. Remove the floor console bezel. 3. Remove the cupholder. 4. Remove the bolts (1) retaining the console to the instrument panel (I/P). 5. Remove the console storage bin. 6. Remove the center console end panel. 7.
SPEAKERS INOPERATIVE – ONE OR MORE PRELIMINARY INFORMATION Perform the Diagnostic System Check – Radio, Stereo and Compact disc. See: Radio, Stereo, and Compact Disc > Initial Inspection and Diagnostic Overview > Diagnostic System Check IMPORTANT: The following information lists the most probable cause of the concern to the least probable cause.
With RPO UQ7 1. Battery positive voltage circuit to the amplifier open. Test the battery positive voltage circuit to the amplifier for an open. 2. Ground circuit to the amplifier open.
What to do when your car door chime is not working?
If the radio is not signalling the speaker to chime, but it is receiving the signal from the body control module, the radio is at fault. Also, make sure the speaker works. Turn the balance and fade to the driver door speaker, and see if it plays music. Then, turn off the radio, turn the key to ON, and open the door.
Why is there no sound coming from my door chime?
If the connection between the body control module and radio is good, the body control module or radio may be at fault. If the radio is not signalling the speaker to chime, but it is receiving the signal from the body control module, the radio is at fault. Also, make sure the speaker works.
Is the seat belt noise coming from the blinkers?
The turn signals work but there is no noise coming from them, no seat belt noise, no door chime either. How do I fix this? I am just discussing this on another GM vehicle today.