Is there an error code for front impact sensor?

Is there an error code for front impact sensor?

Error Code B0100 Electronic Front End Sensor 1 Malfunction. Is this a repair that I can do easily myself? Experience: 20+ yrs. experience as repair shop manager and technician. Ok, this is for the front impact sensor located on the lower radiator support. jackup front end to make access easier. Check that wiring is not torn or broken.

What does b0103 stand for on a sensor?

Code B0103 is for the right side front sensor. Here is the test just in case you need it. DIAGNOSTIC AIDS The following can cause an intermittent condition: A short between the front end sensor signal and low reference circuits ; High or low resistance in the front end sensor signal and low reference circuits

What to do with a b0100 DTC code?

If DTC B0100 was current replace the front end sensor 1. After replacement refer to Repair Verification. If DTC B0103 was current replace the front end sensor 2. After replacement refer to Repair Verification. Ignition ON, use the scan tool to clear the DTCs then recheck for DTCs. Verify no DTCs are set.

What is the b0101 code on a Silverado?

My air bag light is on on my 07 Silverado Classic 1500. The first code I got was a B0101 (Discard Electronic Front End Sensor 1) so I replaced the driver side with a new sensor from Napa. That did not clear the air bag light but did change the code. Now I get a B0100 code (Electronic Front End Sensor 1 Performance).

Error Code B0100 Electronic Front End Sensor 1 Malfunction. Is this a repair that I can do easily myself? Experience: 20+ yrs. experience as repair shop manager and technician. Ok, this is for the front impact sensor located on the lower radiator support. jackup front end to make access easier. Check that wiring is not torn or broken.

If DTC B0100 was current replace the front end sensor 1. After replacement refer to Repair Verification. If DTC B0103 was current replace the front end sensor 2. After replacement refer to Repair Verification. Ignition ON, use the scan tool to clear the DTCs then recheck for DTCs. Verify no DTCs are set.

What is the SRS airbag light code b0100?

B0100 is for the left Front Driver Side Sensor & B0103 is for the Right Front Pass… This Video is for those who are getting Airbag Light code B0100 or B0103 .

My air bag light is on on my 07 Silverado Classic 1500. The first code I got was a B0101 (Discard Electronic Front End Sensor 1) so I replaced the driver side with a new sensor from Napa. That did not clear the air bag light but did change the code. Now I get a B0100 code (Electronic Front End Sensor 1 Performance).