What are the trouble codes on my GMC Sierra?
Two of the most common trouble codes with the GMC Sierra are P0174 and P0171 . Both of these codes reference a number that is given to you when you plug your truck into a OBDII scanner. P0171 and P0174 occur when the air/fuel mixture on the truck gets too lean.
What causes a GMC Sierra to have code p0174?
Here are the typical symptoms that something is wrong when your Sierra has codes P0174 and P0171. Fuel Mileage- may or may not suffer depending on how much the air fuel mixture has changed. Misfire – If the air fuel mixture has gotten too far from factory specs, this can cause the vehicle to misfire or run rough.
How to troubleshoot GM 4.3L, 5.0L, and 5.7L?
In this article, I’m gonna’ demystify the process of troubleshooting these two codes on the GM 4.3L, 5.0L, and 5.7L and I’m gonna’ offer you my own diagnostic strategy (that I’ve used for a number of years with a lot of success).
Why does my GMC lean Bank have a p0171 code?
P0171 GMC Tech Notes If the P0171 is combined with the P0174 code, it’s very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.
Two of the most common trouble codes with the GMC Sierra are P0174 and P0171 . Both of these codes reference a number that is given to you when you plug your truck into a OBDII scanner. P0171 and P0174 occur when the air/fuel mixture on the truck gets too lean.
What causes p0171 DTC in GM 4.3L?
Most Common Causes Of P0171, P0174 DTC’s. CAUSE 1: PCV Tube’s rubber elbow (where it connects to the intake manifold) is torn open and causing a major vacuum leak.
In this article, I’m gonna’ demystify the process of troubleshooting these two codes on the GM 4.3L, 5.0L, and 5.7L and I’m gonna’ offer you my own diagnostic strategy (that I’ve used for a number of years with a lot of success).
What causes vacuum leak in GM 4.3L 5.7L?
Most Common Causes Of P0171, P0174 DTC’s. CAUSE 1: PCV Tube’s rubber elbow (where it connects to the intake manifold) is torn open and causing a major vacuum leak. CAUSE 2: Intake manifold gaskets or plenum gaskets are leaking vacuum. GM, in all its infinite wisdom, uses plastic and rubber gaskets for the intake manifold and plenum gaskets.