What causes a motorcycle not to crank?

What causes a motorcycle not to crank?

One potential issue that might be keeping your motorcycle from starting up is a clogged petcock. The petcock is a fuel control valve. It controls the gas flow between off, on, and reserve settings. Clogged petcocks are a common issue that riders often bring up in forums.

Why does my motorcycle keep stalling?

A stall happens when there is insufficient power being fed from the engine to the rear wheel to get it moving or keep your bike rolling. Once you’re moving it’s all about balancing the usable revs of the engine with your bike’s speed, and remembering to pull in the clutch when you come to a stop!

What should I do if my motorcycle won’t start?

If the reading stays steady, your battery is good to go—and your motorcycle likely has another problem (or a few problems). Fortunately, there are other troubleshooting means that can help determine why your bike won’t start.

What happens when a motorcycle battery is not used?

How a motorcycle battery dies: If a motorcycle battery is not used and just sits, it will lose it’s capacity to power your motorcycle. There is also a phenomenon called parasitic drain.

Why does my motorcycle keep stalling and stalling?

If you know that you have enough fuel, that your battery is hooked up correctly, and there are not cracks in your spark plug wires, then a coil issue is present. Poor idling and stalling will lead up to this problem. Your motorcycle may turn over but will not stay on and will stall out.

Why does my motorcycle not start with the side stand down?

Newer bikes (and some older ones) may refuse to start with the side stand down. Along with all the other high-tech sensors that are on board, your motorcycle might have a built-in code that keeps the ignition from starting if your kickstand is engaged.

What kind of motorcycle won’t go to neutral?

I have a 1982 Kawasaki 440ltd motorcycle. Im having trouble I have a 1982 Kawasaki 440ltd motorcycle. Im having trouble shifting transmission from ist to neutral. It sometimnes works and … read more I have a Yamaha bearcat 350 ATV that the green neutral light won’t come on and it won’t start. Help Please.

Unless you have one of those new all-electric motorcycles, your bike needs three main things to run- Spark, Fuel/Air mixture and Compression. Your bike will either run rough or not start at all without the proper amounts of any of those elements.

Why is my neutral light not working on my bike?

Clutch switches, kickstand switches and the neutral light can all break to cause this type of problem. Try starting with the kickstand up, clutch in, and bike in neutral to see if the motor spins. If not, these switches can normally be bypassed with a paperclip pressed into both ends of the connector one at a time, MacGyver-style.

Newer bikes (and some older ones) may refuse to start with the side stand down. Along with all the other high-tech sensors that are on board, your motorcycle might have a built-in code that keeps the ignition from starting if your kickstand is engaged.