What does maint reqd mean on Toyota RAV4?
scheduled maintenance
The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.
How do you reset the maintenance required light on a 2009 Toyota RAV4?
Just follow these simple steps:
- Put your key in the RAV4’s ignition.
- Push and hold the trip meter reset button on the dashboard.
- Hold the odometer button for ten seconds.
- Once the light goes out, release the odometer button and start the car.
What does maint reqd on dashboard mean?
Toyota maintenance light
The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.
What does the maintenance required light on a Toyota RAV4 mean?
These intervals happen at mileage or time intervals (typically every 5000 miles/6 months). The maintenance required light is standard in all newer Toyota vehicles, and helps insure long life and dependability by making sure factory maintenance intervals are met. The maint reqd light means that Toyota recommends servicing your Rav4 soon.
When do you reset the maintenance required light on a Toyota?
Once your Toyota has been serviced, the “MAINTENANCE REQUIRED” light will need to be reset. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. With only a few simple steps, you can learn how to do it yourself: Step 1: Insert the key into the ignition and turn the car to the “ON” position.
What do the warning lights on a Toyota mean?
With the smart key system, push the button twice with your foot OFF the brake pedal. The warning lights should now be flashing on the instrument cluster. A light that is flashing regularly means that particular system is normal. A coded flash indicates a problem.
How to check the engine light in a Toyota?
All you need is a short piece of small gauge wire–speaker wire works fine, or even a paper clip bent into a U shape. With the ignition off, place the jumper wire across pins 4 and 13 of the diagnostic port. Now turn the key to ON, but don’t start the engine. With the smart key system, push the button twice with your foot OFF the brake pedal.