What does the code p1682 on a Chevy mean?
An expert that got 5 achievements. An expert that has over 500 points. Re: Chevy code P1682? What does this mean? What does this mean? When is the code detected? There are 2 ignition 1 voltage circuits supplied to the Engine Control Module (ECM). The first ignition circuit is provided by the powertrain relay, through a fuse.
How does DTC p1682 set ignition 1 voltage?
The second ignition 1 voltage circuit is supplied by the run/crank relay through a fuse, and is used to power the remaining internal ECM circuits. If the ECM detects a voltage difference between the 2 ignition 1 voltage circuits, DTC P1682 will set There are 2 ignition 1 voltage…
How long does it take to repair p1682 GMC ignition switch?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1682 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
What does DTC p1682 stand for in ECM?
The second ignition 1 voltage circuit is supplied by the run/crank relay through a fuse, and is used to power the remaining internal ECM circuits. If the ECM detects a voltage difference between the 2 ignition 1 voltage circuits, DTC P1682 will set.
An expert that got 5 achievements. An expert that has over 500 points. Re: Chevy code P1682? What does this mean? What does this mean? When is the code detected? There are 2 ignition 1 voltage circuits supplied to the Engine Control Module (ECM). The first ignition circuit is provided by the powertrain relay, through a fuse.
How long does it take to repair p1682 Chevy ignition?
Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1682 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type.
The second ignition 1 voltage circuit is supplied by the run/crank relay through a fuse, and is used to power the remaining internal ECM circuits. If the ECM detects a voltage difference between the 2 ignition 1 voltage circuits, DTC P1682 will set There are 2 ignition 1 voltage…
Why do I get p1682 on my ECM?
The code you are getting P1682 is due to the ECM seeing a difference in the voltage levels of the two main power inputs to the ECM and will store the code when one voltage is different than the other one. You should have the power relay and start power relays replaced before anything else.
How much does it cost to diagnose a p1682 code?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1682 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What does a p1682 error code mean?
A P1682 error code usually means that the ignition switch or either of its circuits, or both, are damaged. The ignition switch is responsible for providing electric current to the starter so that the engine can start. The ignition switch is sometimes part of an anti-lock theft system.
What are the causes of a p1682 GMC ignition?
P1682 GMC Possible Causes 1 Faulty ignition switch 2 Ignition Switch harness is open or shorted 3 Ignition Switch circuit poor electrical connection 4 Faulty Engine Control Module (ECM)
How much does it cost to diagnose a p1682 GMC code?
The cost of diagnosing the P1682 GMC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. When is the P1682 GMC code detected? Engine Light ON (or Service Engine Soon Warning Light)