What does the VSA light mean on a Honda CRV?
It means that there is something wrong with your Honda vehicle’s Vehicle Stability Assist (VSA®) system. This system helps to stabilize the vehicle during cornering if the car turns more or less than desired.
What’s the problem with the Honda CRV ABS pump?
Honda CR-V ABS pump module problem – VSA light on. This ABS Pump Module is a very common failure for the Honda CR-V built between 2002 – 2008. The fault causes the VSA/ABS light to illuminate permanently on the instrument cluster.
Why does the VSA light keep coming on on my Honda CRV?
If it stays on, it is letting you know that there is some problem with the CR-V’s VSA itself. When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop.
How to fault reset Honda ABS and VSA?
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).
What is the VSA code for a Honda CRV?
VSA warning light Common fault codes: 66-1 – Brake Pressure Sensor Affected Vehicles: Honda CR-V 2002-2008 (2 nd and 3 rd generation) Honda Accord 2003-2008 (7 th generation)
Honda CR-V ABS pump module problem – VSA light on. This ABS Pump Module is a very common failure for the Honda CR-V built between 2002 – 2008. The fault causes the VSA/ABS light to illuminate permanently on the instrument cluster.
If it stays on, it is letting you know that there is some problem with the CR-V’s VSA itself. When the light comes on, Honda suggests getting someplace safe and restarting the engine. If the VSA light doesn’t come back on, you are good to go. If it does come back on, it is time to diagnose the issue, or take it in to the shop.
VSA warning light Common fault codes: 66-1 – Brake Pressure Sensor Affected Vehicles: Honda CR-V 2002-2008 (2 nd and 3 rd generation) Honda Accord 2003-2008 (7 th generation)
Honda ABS / VSA Fault Reset Procedure: Turn the Ignition switch OFF and take the key out. Short pins 4 and 9 on the OBD connector located under the dash on the driver side. Now put your foot on the brake pedal and hold it down lightly while turning on the ignition switch to position “II” (all the dash lights come on, but don’t start it).