What should I do if my car horn is not working?

What should I do if my car horn is not working?

If your car horn isn’t working or is making a low-volume or high-pitched sound, you can fix it easily. Oftentimes, a broken horn is related to a blown fuse or possibly a faulty relay. Locate the fuse box and check to see if the horn fuse or relay needs replacing. If the problem is the horn itself,…

Why does my GMC Truck Horn randomly go off?

And then when you used the blinker it would honk in unison to that and turn off when you messed with the blinker lever…So we pulled the fuse and it stopped but i would still like to get to use my horn Click to expand… You don’t have an alarm with horn honk by chance, do you?

How does a car horn relay work in a car?

Some vehicles have a single horn, and others use two horns that each operate in a different frequency range. In a typical car horn circuit, the switch or button the driver pushes is connected to a relay. This horn relay will be connected to the horn switch, battery positive, and the horn or horns.

Where is the switch on a car horn?

The basic idea is that some type of switch, usually located somewhere in the steering wheel, activates an electric horn. Some vehicles have a single horn, and others use two horns that each operate in a different frequency range. In a typical car horn circuit, the switch or button the driver pushes is connected to a relay.

Why are the turn signals on my Honda Civic not working?

It is expected for the turn signals to start blinking when the blinker switch is flipped, but that isn’t always the case. Faulty turn signals aren’t only unsafe, they could also point out an existing electrical issue in your Honda Civic.

What should I do if my car horn fuse is blown?

Install a new fuse that matches the blown one into the fuse box. If the fuse is blown, replacing it is an easy fix. Insert a fuse with the same amperage into the slot for the horn fuse. Make sure it’s fully inserted, then close the lid of the fuse box, and test the horn to see if it’s working.

Why does my car horn make a clicking sound?

Connect one clamp to the terminal on the horn and quickly touch the other end to the positive battery terminal. If the fuse blows, you’ve got a bum horn. If the horn makes a clicking sound, the problem could be a poor ground connection. Clean the horn’s ground connection and try powering the horn again.

If your car horn isn’t working or is making a low-volume or high-pitched sound, you can fix it easily. Oftentimes, a broken horn is related to a blown fuse or possibly a faulty relay. Locate the fuse box and check to see if the horn fuse or relay needs replacing. If the problem is the horn itself,…

Install a new fuse that matches the blown one into the fuse box. If the fuse is blown, replacing it is an easy fix. Insert a fuse with the same amperage into the slot for the horn fuse. Make sure it’s fully inserted, then close the lid of the fuse box, and test the horn to see if it’s working.

Connect one clamp to the terminal on the horn and quickly touch the other end to the positive battery terminal. If the fuse blows, you’ve got a bum horn. If the horn makes a clicking sound, the problem could be a poor ground connection. Clean the horn’s ground connection and try powering the horn again.

Where does the power come from for a car horn?

Your car’s horn draws power from the battery via 2 wires. Locate your horn behind the front grill—it’s a small metal disk with 2 cables connected to it. Then, check the wires to make sure they’re connected to the horn. Look up a diagram online or refer to your owner’s manual if you have trouble locating the horn.

What’s the best way to fix a broken horn?

Use a pair of needle-nose pliers to remove the fuse. Car fuses are small and it can be difficult to get a good grip on them with your fingers. Use a pair of needle-nose pliers to grab hold of the top of the fuse and pull it straight out of the fuse box.

Where do you find a broken car horn?

Locate the horn or horns on the radiator core support or behind the car’s grille. Remove the wire connector. The horn should resemble a fuse with wires coming out of it.

Is there a fuse for the horn on a 98 Honda Accord?

Brake lights for Honda 1993 Accord Lx are not working. Have a repair manual and a owner’s manual. Both refer to a brake light fuse. Can’t find a brake light fuse. Replaced the brake light switch and a…

What to do if your car horn is not working?

If the fuse is good, jump power directly to the horn with a homemade fused jumper (pictured here). You can make a fused jumper with 16-gauge wire, two clamps and an in-line fuse holder. Connect one clamp to the terminal on the horn and quickly touch the other end to the positive battery terminal. If the fuse blows, you’ve got a bum horn.

Where is the fuse box for the car horn?

Look under the hood or dashboard of your car to find the fuse box. Most cars have at least 2 fuse boxes, but the fuse for your car’s horn is likely under the hood or beneath the dashboard near the steering wheel. Look for a black box with a removable lid that contains the individual fuses.

What kind of horn do I need for my Honda CRV?

One of our most requested items are replacement horns for the CR-V. The challenge with this vehicle is to find horns small enough to fit into the tiny space provided by the manufacturer. This is our workaround to the problem. Our kit includes a PIAA Slimline Sports Horn pair, mounting hardware and two of our special plug and play harnesses.

Why does my Honda CRV no longer start?

If the Honda CR-V no longer starts and you don’t notice any noise or lights on the dashboard when starting, there may be a problem with the electrical system. The same signs can apply to a deeply discharged battery, so this should be ruled out first. If the electrical system malfunctions, a blown main fuse can prevent electricity from flowing.

Why are the mounting bolts on my Honda horn black?

Accidentally moving the inside components can damage the horns. The mounting bolts take up two holes for the grille cover so you will be leaving out two clips when putting everything back together. Unlike the photos above the bolts you will receive will be black in order to blend in with the grille cover.

How does a Honda CRV battery come to life?

The battery can be brought to life by starting aid, in which the battery receives a current pulse from the starter battery of another vehicle, which is enough to start the engine. Or by charging with a battery charger, which on the other hand takes a few hours. It is faster with a start booster.

What’s the best way to shut off a horn?

Follow these steps to disconnect the battery safely: Turn off the engine. (Leave it off for the steps below as well.) Wear insulated gloves and safety goggles. Remove all metal jewelry. Find a socket wrench that fits the terminal (typically ⅜ inches). Disconnect the negative terminal first.

How does a car horn work in a car?

Car horns rely on some pretty basic technology, and the fundamentals of most car horn systems have remained relatively unchanged for decades. The basic idea is that some type of switch, usually located somewhere in the steering wheel, activates an electric horn.

Why is the horn on my car jammed?

If the electrical parts are all functional, the horn switch under the steering wheel may be jammed. Another possibility is a broken clock spring: the coil that winds and unwinds as you turn the wheel to maintain the electrical connection.

But even if the simpler solutions, such as removing the fuse or banging on the horn, stopped the honking, your car battery, steering system, or horn should still be inspected by one of YourMechanic’s qualified mechanics to resolve the issue.

How do you turn off a jammed car horn?

Use the following steps to learn how to turn off a jammed car horn. Step 1: Attempt a manual dislodge. Try pushing your car horn several times. This may dislodge whatever may be stuck in the horn and steering assembly and may be all you have to do to fix the issue.

Why does my car horn drain my battery?

Not only does a constantly running car horn cause annoyance to you and your neighbors, but it can actually drain your car’s battery as well. A jammed horn is likely the result of a jammed mechanical component in the steering column.

Where is the fuse on a car horn?

If your car horn has a dedicated fuse, you may simply disconnect the fuse to turn off the car horn. Step 4: Find your vehicle’s fuse box. This is usually located on the underside of the dashboard near the steering wheel. Step 5: Remove the cover and examine the fuse box.

When to reset the Check Engine light on Honda Civic?

Continue reading to learn how to reset this light and save yourself the dealership cost. This article applies to the Honda Civic (1992-2000), and Accord (1990-2002). The check engine light in your Honda offers important diagnostic information, which will alert you of a serious problem like a bad catalytic converter.

What should the voltage be on a car horn?

Start by testing for 12 volts at the connector to the horn. One side of the circuit is carried by the car’s metal frame, so you’ll need to check between a good ground point and the wiring connector for the horn. If there’s no voltage at the connector, try checking the horn relay.

How to fix a car horn on a Honda Civic?

To avoid this, cancel and sign in to YouTube on your computer. Hi, I’m Mark and have been working on my own cars for about 15 years now. I have now amassed quite a bit of experience , to start sharing some of it, with yourselves. This includes changing spark plugs right through to a head gasket. Whatever comes my way, I hope to share with you.

Why is the fuse on my car horn not working?

If the plastic on the fuse looks smokey or cracked, then the fuse is blown. A functioning fuse means that the problem could be the horn relay or horn itself, which needs to be replaced. Sometimes you can’t tell that a fuse is bad just by looking at it. Try replacing the fuse anyway if your horn isn’t working.

What are the problems with a car horn?

A car horn is an important element of a properly functioning vehicle. You may encounter several problems with a car horn including a horn that blows at a lower tone than is normal or a horn that does not blow at all.

Where do I find the horn on my car?

Your car’s horn will look like a small metal disk with 2 cables connected to it. After you remove the grill, look for the horn mounted on the screen that was behind the grill on the front of the car. The horn may to the left or right of the front screen.

How do you shut off a jammed car horn?

To shut off a jammed horn, first try pushing the horn and twisting the steering wheel a few times. If that doesn’t work, disconnect the car battery to silence the horn. Should the problem recur when you reconnect the battery, disconnect the fuse connected to the horn and remove the horn relay.

What happens if you have a bad horn?

Federal regulations require that all road going vehicles have some sort of audible warning device, so a vehicle with a faulty horn is not up to safety standards and may be liable to receive a citation. Usually a faulty horn will produce a few symptoms that can alert the driver of a potential issue.

Can a bad horn relay cause the Horn to melt?

In more severe cases may even result in the relay burning or melting. The relay will have to be replaced in order for the horn to be returned to full functionality. As with any electrical component on a vehicle the horn relay can eventually fail and cause issues.

To shut off a jammed horn, first try pushing the horn and twisting the steering wheel a few times. If that doesn’t work, disconnect the car battery to silence the horn. Should the problem recur when you reconnect the battery, disconnect the fuse connected to the horn and remove the horn relay.

Is it against the law to disconnect a car horn?

In many states, yes. Check with your state MVA/DMV to verify if disconnecting the car horn is against the law. How can I disconnect the horn on my car? To disconnect the horn, locate the fuse for the horn in the fuse box. Remove the fuse. The car will still operate normally without a horn. You can also remove the horn relay.

In more severe cases may even result in the relay burning or melting. The relay will have to be replaced in order for the horn to be returned to full functionality. As with any electrical component on a vehicle the horn relay can eventually fail and cause issues.

Review your car’s owner’s manual for fuse box locations and diagrams of the fuse boxes, if needed. Locate the fuse and remove it from the fuse box. Look at the piece of thin metal inside the fuse. If it looks burnt or is broken, replace the fuse and try to honk the horn. If your car’s horn still doesn’t work, it is time to check the horn relay.

How to reset my Honda Accord after changing an alarm?

Turn the key to the unlock position. Turn the key to the lock position. Turn the key back to the unlock position. The alarm should now be disabled. Start your Honda Accord’s engine and allow the vehicle to run for at least 10 minutes. This will allow the Accord to reset the alarm.

What to do when your car horn won’t stop?

Getting the horn to stop may be as simple as tapping the horn switch on the steering wheel a couple of time. If this doesn’t work, there are other options to consider as well. Press or tap on the horn switch on the steeling wheel.

The first step is to identify the source of the problem—here’s how. Car horns sit up front where they’re exposed to rain and road chemicals. Once that spray gets into the horn’s innards, it can short out the coil and kill the horn (and blow the fuse in the process).

Where is the horn located behind the grill?

Locate the horn behind the grill. Your car’s horn will look like a small metal disk with 2 cables connected to it. After you remove the grill, look for the horn mounted on the screen that was behind the grill on the front of the car. The horn may to the left or right of the front screen.

Where are the wires on a car horn?

Make sure the wires are correctly connected to the horn. Your car’s horn draws power from the battery via 2 wires. Locate your horn behind the front grill—it’s a small metal disk with 2 cables connected to it. Then, check the wires to make sure they’re connected to the horn.

What kind of engine does the Hyundai Sonata have?

A power sunroof and premium stereo are optional. Trunk space totals 16.3 cubic feet. The Sonata’s 2.4-liter four-cylinder produces 162 horsepower, versus 235 hp for the available 3.3-liter V-6. Standard in the Limited and optional in the SE the V-6 has variable valve timing.

Is the 2007 Hyundai Sonata a good car?

2007 Hyundai Sonata ok car. The inside of the car is nice and it for the most part is a reliable car. I have a problem with how many car issues I have had all together. I’ve spent more on fixing my car than I paid for the car… It is got good gas mileage. It is worked well for the past three years, but it is an older car and has its issues.

When did the new Hyundai Sonata come out?

The Hyundai Sonata shuffles trim levels for 2007. Last year’s GL, GLS and top-of-the-line LX models become GLS, SE and Limited, respectively. Equipment is roughly equivalent to each trim’s predecessor. First seen at the 2004 Paris Motor Show, the redesigned Sonata sedan made its U.S. debut several months later at the 2005 Detroit auto show.

Why does my iboats boat Horn stop working?

Obviously the horns are working, just the flow of electrons is getting stopped somewhere along the line. Also check the ground, make sure all connections are tight and clean. You had some oxidation on the fuse, could have it somewhere else also.

What to do if your horn stops working?

That may fix it. Might want to do this with it directly wired to a battery (or battery charger). Also, a good solid battery voltage might improve the issue. If it does not work directly connected, it can never work through the normal wiring. The fact that the fuse does not work is incidental to the real issue.

How do you fix a busted boat horn?

Really soak the horn, spraying the lube right into the trumpet. Let it soak. Then try the horn. Sometimes a few applications are necessary. This will not work every time, but works often enough that it is worth a shot before you buy a new horn.

What to do if your car horn makes a clicking sound?

If the fuse is good, jump power directly to the car horn with a homemade fused jumper (photo). If the horn makes a clicking sound, the problem could be a poor ground connection. Clean the horn’s ground connection and try powering the horn again. If the horn still clicks, you’ll have to replace it.

Why does my car horn not work on my Boat?

Going to check battery tonight and then see what the voltage reads at the horn, when I hit the switch. Then start checking the connections/ground wires from there. Car horns draw a lot of current which is why they normally work through a relay whereas a boat horn does not.

How do you replace fuse on car horn?

Insert a fuse with the same amperage into the slot for the horn fuse. Make sure it’s fully inserted, then close the lid of the fuse box, and test the horn to see if it’s working. The diagram on the inside of the fuse box lid should list the amperage of the fuse so you can find the correct replacement fuse.

How to fix steering wheel on Jeep Wrangler?

Dont forget to subscribe and turn on post notifications. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

What’s the best way to fix a broken car horn?

Car fuses are small and it can be difficult to get a good grip on them with your fingers. Use a pair of needle-nose pliers to grab hold of the top of the fuse and pull it straight out of the fuse box. Don’t wiggle or bend the fuse or you could break off a piece in the fuse box that will difficult to remove.

Dont forget to subscribe and turn on post notifications. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

Make sure the wires are correctly connected to the horn. Your car’s horn draws power from the battery via 2 wires. Locate your horn behind the front grill—it’s a small metal disk with 2 cables connected to it. Then, check the wires to make sure they’re connected to the horn.

Your car’s horn draws power from the battery via 2 wires. Locate your horn behind the front grill—it’s a small metal disk with 2 cables connected to it. Then, check the wires to make sure they’re connected to the horn. Look up a diagram online or refer to your owner’s manual if you have trouble locating the horn.

What happens if your car horn is not working?

If your horn fails, you are left without an audible warning system. Therefore you will not be able to alert other drivers or children on the road and therefore you may not be able to avoid an accident. Driving without a horn is illegal in many states.

Where is the Horn relay on a car?

Locate the horn relay. The horn relay is found in the main fuse box located in the engine compartment. Use a multimeter to test the horn relay. If you aren’t comfortable with testing a relay, you can try this old trick.

Is it illegal to drive without a horn?

Driving without a horn is illegal in many states. When you get your car state inspected, one of the normally checked components is the operation of the horn. If the horn doesn’t work, you will fail state inspections.

You can connect the horn negative terminal directly to the car’s body or connect it to the battery negative terminal, which will serve as our negative feed. Next, use a +12 volt feed line from the battery positive terminal to the horn. When you touch the horn terminal, you should hear the horn beep. Horn does beep. The horn itself is good.

Driving without a horn is illegal in many states. When you get your car state inspected, one of the normally checked components is the operation of the horn. If the horn doesn’t work, you will fail state inspections.

Why does my Jeep not start when there is no power?

There is a wire that goes to the power distribution box on the finder close to the battery, if you don’t have power to it nothing will work. Could be a dirty connection there or there is also a large main fuse in the PDB that supplies power to all circuits in the jeep. I would check the fuse box for problems.

Why are the lights not coming on in my RV?

THAT MEANS YOUR BATTERY ISOLATOR (COULD BE DIODE-BASED OR SOLENOID BASED) IS NOT WORKING. BOTH BATTERY BANKS SHOULD BE CHARGED BY THE ALTERNATOR. Plugged in not running the Batteries are at 12.58.

Why is the battery light not working on my car?

The belt drives the alternator, which recharges the battery. If it’s loose or worn, the alternator may not be able to recharge the battery so it can start the engine next time around. (This could also cause your battery light to come on.)

Why does my car not start but the radio and lights work?

While most of the reasons why a car won’t start but the radio and lights still go on is related to a mechanical problem, there are instances when it can be the result of human error. This is particularly true with certain vehicles.

Why does my car not start when I Turn on the ignition?

It isn’t uncommon for car owners to discover that their vehicles won’t start upon turning the ignition on. Often, this issue is caused by a dead battery. When a dead battery is the cause of the problem, all accessories in the vehicle, including the radio and lights, won’t work.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

Use a pair of needle-nose pliers to remove the fuse. Car fuses are small and it can be difficult to get a good grip on them with your fingers. Use a pair of needle-nose pliers to grab hold of the top of the fuse and pull it straight out of the fuse box.

Locate the horn or horns on the radiator core support or behind the car’s grille. Remove the wire connector. The horn should resemble a fuse with wires coming out of it.

Why is my car horn stuck on the door?

Horn stuck in On position. The extended buzzing of the door-open warning caused the relay (which controlled both the door-open warning buzzer and the horn) to overheat, and I wound up with a jammed-on horn. Obviously, the short-term solution was to disconnect the horns until the relay cooled down and functioned normally.

What should I do if my car horn wont shut off?

Disconnect the car battery. This will silence the horn, and if you’re lucky it may reset the horn and solve the problem (although there may be an underlying issues that causes it to recur). It’s also a good idea to disconnect the battery before trying the steps below, to reduce the danger of electric shock or short circuits.

If the electrical parts are all functional, the horn switch under the steering wheel may be jammed. Another possibility is a broken clock spring: the coil that winds and unwinds as you turn the wheel to maintain the electrical connection.

Where is the fuse on the car horn?

Disconnect the horn itself. If your car has no relay and the horn’s fuse is on the same circuit as other important components, remove the horn itself. This is located under the hood, usually behind the front grille or attached to the firewall behind the engine.

Why does my car horn make a different sound?

If your horn sounds different than usual or you do not hear the usual clicking sound when you press it, the relay is likely shorted. Replace it and try to discover the cause of the short, such as a damaged wire or water in the fuse box.

How to disable or bypass factory security system Nissan Maxima?

The bottom line is, in your circumstances it will be vastly easier, more efficient, and less costly to simply fix the immobilizer system that you already have in place. Indeed, the Factory Service Manual has a diagnostic protocol to accomplish just that.

How to disable the security alarm on a Nissan Maxima?

You can disable the alarm (which is the horn) by opening the hood, on the left front side is a box and there are plugs marked horn 1 and horn2, pull both of them out. I have a 97 maxima and the alarms kept going off randomly when the car was locked and parked. Or you can NOT lock your car.

How do I disable the Horn chirp on my Nissan?

To disable the feature, hold the lock and unlock button simultaneously for about 3 seconds. The parking lights will flash 3 times to indicate the procedure was successful. Now the horn chirp is currently deactivated. To enable to horn chirp again, hold the lock and unlock buttons at the same time for about 3 seconds.

Is the Nissan Maxima factory security system foolproof?

These immobilizer systems are complex and nearly foolproof to all but highly trained electrical engineers and even they will have trouble due to the need for specialized components, programming and so forth. That’s why these systems have been so effective of late in preventing car thefts.

How long does it take for Nissan Maxima to stall?

New coils plugs and wire plugs now car starts and stalls out within 3 seconds. I would recommend retracing your steps on this. It is possible that an electrical connector or a vacuum hose of some kind could have been disconnected and not put back during the replacement of the spark plugs and ignition coils….

Why does my car horn blow when the battery dies?

It’s probably your alarm system that’s going off. When the battery died, the car’s alarm system assumed that someone is tampering with the battery or had disconnected it in order to break into the car. Here’s what you can do hook up the jumper cables. The horn will start to blow.

Locate the horn relay. The horn relay is found in the main fuse box located in the engine compartment. Use a multimeter to test the horn relay. If you aren’t comfortable with testing a relay, you can try this old trick.

Why is the horn not working on my Nissan Frontier?

The steering column plastics come off with two screws (I believe) to test continuity at the switch. I would put a meter on the + and – of the horn and have somebody push on the sterring wheel (horn).

You can connect the horn negative terminal directly to the car’s body or connect it to the battery negative terminal, which will serve as our negative feed. Next, use a +12 volt feed line from the battery positive terminal to the horn. When you touch the horn terminal, you should hear the horn beep. Horn does beep. The horn itself is good.

Why does my car horn keep blowing at reduced volume?

In our scenario, the horn blew for a few seconds at reduced volume. This means that the circuitry that feeds the horn with 12 volts is alive and well. Most vehicles actually have two horns, wired to sound at the same time. They usually will be of a different pitch, sounding a chord instead of a single note.

How many horns does a car have at the same time?

This means that the circuitry that feeds the horn with 12 volts is alive and well. Most vehicles actually have two horns, wired to sound at the same time. They usually will be of a different pitch, sounding a chord instead of a single note. Some luxury cars use three horns for a more complex, melodious sound.

Why does the horn not work on my Jeep?

I did not check the physical wires (as I did not know where they were) but I did make sure the fuse was not blown and the relay was securely in place. The horn does not work when I press the button on the wheel or beep when I use the clicker to lock the doors (as it normally should).

Are there any fuses on the left horn?

I checked both fuses ( left and right horn ) under the hood, both checked out good. I have turned the key to the “on” position and checked the fuses with the volt meter, I have noticed that all the ten amp fuses in the box read approximately twelve volts, except for the two ten amp horn fuses.

Clean the horn’s ground connection and try powering the horn again. If the horn still clicks, you’ll have to replace it. If the car horn works with jumped power, the problem lies upstream.

If the horn makes a clicking sound, the problem could be a poor ground connection. Clean the horn’s ground connection and try powering the horn again. If the horn still clicks, you’ll have to replace it. If the car horn works with jumped power, the problem lies upstream.

How do you unlock and start a Subaru Outback?

The only way to lock, unlock and start the car is, if after driving, turn off the key and MANUALLY lock all the doors from the inside, then use the key to lock the driver’s door. That way the electronic locks and security stay asleep. Better to get some fobs programmed, eh?

Is there a key less entry on a Yaris horn?

Hi mike. yes mine is a key less entry . the trouble with checking the horn itself is that you have to remove the front bumper shroud which looks a bit daunting. the horn fuse is 10A while on my wife’s yaris which is 2005 its a 15A fuse but yes on the lid of the fuse box one relay is blue and the 2nd relay is black but there are no other relays

What to do if your Volvo check engine light is not working?

With your Volvo safely parked, you should read the fault codes, fix the underlying problem then reset the check engine light. For this step, you will need an OBD2 scanner. The procedure is effortless and takes less than 10 min. Locate the OBD-II port under the dashboard. Turn ignition to position II.

Why is my Check Engine Light always on?

If your Volvo check engine light is always on it means a fault code is stored in your car’s On Board Diagnostic (OBD) system. The problem can be something as simple as a loose gas cap but it can also be an indication of an engine or emission problem.

Why does my car not start when I put it in neutral?

Today, even putting in neutral after using the shift lock release, the car still has no power and will not start. I do not think it’s a battery issue, but now my car is stuck on the third floor the parking garage in my apartment building and I have no idea how to at least get it to turn on to take to a mechanic.

What to do when your car won’t start?

When I went to turn on the car, all power died from the car and nothing would happen when I turned the key. I wiggled the steering wheel and tried to put the car in neutral using the shift lock release and the power came back on and I was able to start it.