What should I do if my timing belt breaks?
The belt breaking doesn’t cause other problems but other problem like water pump seizing, cam shaft bearing seizing, timing belt tensioner seizing will break the belt. If you do change the belt either before it breaks or after it breaks you should also change the water pump and belt tensioner at the same time every time.
How much does it cost to change timing belt?
The timing belt is critical for all the internal parts to be in sync. If the timing is off, you will surely know it by how the engine runs. Most timing belts need to changed between 80-100K. The cost to do it varies, but always expect several hundred.
What happens when the timing belt breaks on a PT Cruiser?
To expand on guyiknow’s answer. PT Cruisers run semi interference engines. The path of the valves will not enter the path of the piston. It is possible for the exhaust valves and intake valves to contact at which point you end up with bent valve stems. My guess would be the determining factor is where the belt breaks.
Can a harmonic balancer be removed from a timing belt?
Determine if the harmonic balancer pulley needs to be removed to remove the timing belt cover. Often, the cover saddles over the end of the crankshaft, and this pulley will not allow you to remove the cover without first removing it.
What should I do if my timing belt broke?
The cylinder head work alone will cost you $3-400 per head plus all the gaskets and timing belt kit (I recommend Aisin or OE Honda parts only–No Gates or Dayco, etc.) Depending on the mileage of the engine you might even consider a used replacement engine. First thing to do is contact the person who did your timing belt.
The timing belt is critical for all the internal parts to be in sync. If the timing is off, you will surely know it by how the engine runs. Most timing belts need to changed between 80-100K. The cost to do it varies, but always expect several hundred.
What happens when the timing belt snaps on a car?
In a non-interference engine, the pistons and valves don’t occupy the same space, so if the timing belt snaps, no valve or cylinder damage occurs. You just pop a new belt on, and the engine should theoretically drive normally.
Can a crank pulley be removed from a timing belt?
The crank pulley is the main pulley at the bottom of the engine. It needs to be removed in order to change the timing belt. However, it’s not easy if you only have hand tools, since the torque on this bolt is often pretty extreme.