What to do when maintenance required light comes on?
Once the regular odometer readings are back on the screen, you can release the reset button and turn your car on. The maintenance required light should not appear on your dashboard anymore. If the light still appears, repeat the procedure again until the maintenance light goes away from your dashboard.
What does the maintenance required light mean on a Toyota?
The routine 5,000-mile service called for by the maintenance required light in a Toyota or Lexus, for example, includes an engine oil and filter change, tire rotation, multi-point inspection, as well as an inspection and adjustment of all fluids.
What’s the difference between a check engine light and maintenance required light?
Unlike a check engine light, a maintenance required light is based strictly on a car’s mileage and when the light was previously reset. A qualified service technician can diagnose the car’s maintenance needs and provide the necessary services, such as changing the engine oil and oil filter or providing a general vehicle inspection.
What does the maint reqd light mean on a Toyota Prius?
The maint reqd light means that Toyota recommends servicing your Prius soon. Depending on what the vehicle mileage is when the light came on, it could mean that any of the following maintenance is needed:
What does the “maintenance required” light mean?
The maintenance required light (maint reqd) indicates that factory service interval has been met. These intervals happen at different mileage or time intervals (typically 5000 miles/6 months).
How do you reset the maintenance required light?
Turn of Maintenance Required Light. Here’s what to do: With the car off and key out, hold in the odometer select/reset button. Insert the key and turn to the run position without starting the car. Keep holding the button in. The Maintenance Required Light will blink once and then in another 5-10 seconds.
How do I reset the required maintance light?
- Turn ignition switch to the ON position
- Trip Display to TRIP A mode
- Turn the ignition switch to the OFF position
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
How do I reset maintenance light?
Turn your vehicle’s ignition to the “acc” setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
How to reset the Toyota maintenance required light?
Turn the Vehicle Off and Press the Trip Meter Reset Button Once you have turned the key back off, make sure that you press the trip meter reset button to reset the maintenance required light. Hold this button for a while. For some models, this is the button used to switch from the odometer reading to the other two trip meters. 3.
How to reset the maintenance required light on a Lexus?
Follow this procedure to reset the maintenance required light on most Lexus vehicles (with video): 1. Turn the ignition switch to the ON position. 3. Turn the ignition switch to the OFF position. 4. Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position. 7. Turn the ignition to the OFF position.
Why does my Toyota maintenance light keep flashing?
The Toyota maintenance light relies entirely on the odometer counting those 5,000 miles, so it has no way of detecting if you changed the oil in the meantime. That’s why this light can become annoying if you just changed your oil and it flashes on your dashboard reminding you to do it.
When does the maintenance required light turn on?
Once it reaches 5,000 miles again, the “MAINTENANCE REQUIRED” light will turn on again. While the maintenance reminder system can be used as a reminder to the driver to have the vehicle serviced, it only be used as a guideline that only takes into account how the vehicle is driven and under what driving conditions.
When do you reset the maintenance required light on a Toyota?
Once your Toyota has been serviced, the “MAINTENANCE REQUIRED” light will need to be reset. Some servicers will neglect to do this, which can lead to premature and unnecessary service light triggers. With only a few simple steps, you can learn how to do it yourself: Step 1: Insert the key into the ignition and turn the car to the “ON” position.
When to reset maintenance yellow light on Generac generator?
As in years past, I always do the maintenance the first week of June and then just reset the yellow light once it illuminates on 11 June of every year. Today, the yellow maintenance reminder light came on with “Inspect Battery” showing in the maintenance log sub menu.
Do you stop when the light turns yellow?
The bottom line is, when the light turns yellow, stop, if you can do so safely, i.e., without skidding and losing control of your car. This is the opinion of John Boyle.