When to replace headlight bulb on 2014 Jeep Grand Cherokee?
They will make you more visible to other drivers while lighting up the road ahead so you can drive with confidence not matter what the weather conditions are like outside. Be sure to replace your 2014 Grand Cherokee headlight bulb as soon as it burns out. Driving with only one working bulb is dangerous. In many places it’s illegal too.
What kind of headlights does a Jeep Cherokee have?
Some Jeeps have high intensity discharge headlights, sometimes referred to as xenon lights. These bulbs have a very high voltage that runs through them, even if the battery is disconnected. If your Cherokee has this type of bulb, we do not recommend that you attempt to change it yourself.
How to change a low beam headlight bulb?
Click to expand… You need to remove the airbox on the drivers side and the PCM on the passenger side if you want to do it without removing the bumper and lights. also the plastic caps in the fender liners are there to help you take the dust cover off the headlamps so you can access the bulb to replace. Not simple but not impossible either.
Is the HighBeam the same bulb as the headlight?
In some Jeeps, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Jeeps have high intensity discharge headlights, sometimes referred to as xenon lights.
When to Change headlight bulbs on Jeep Cherokee?
Changing both headlight bulbs on your Cherokee at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side.
In some Jeeps, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Jeeps have high intensity discharge headlights, sometimes referred to as xenon lights.
How do i dim the high beams on my Jeep?
Press the apps key on the UConnect screen. Press the all apps key. Press the settings key. Press the lights key. Press the auto dim high beams key – making sure there is a check next to the auto dim high beams. Press the X in the top right corner. Then press forward on the turn signal arm (towards the dash).
When do the high beam lights turn off?
My high beams actually turn off when there is a reflection from the big road signs, especially the yellow “no passing zone” facing my way from the left side. It turn them off also if the cars in front of me are far, far away. But if you are in country roads in complete dark works perfectly. I think I read something in the manual about speed too.