Where is the oil filter located on 2003 Honda Civic?

Where is the oil filter located on 2003 Honda Civic?

From the underside of the car, locate the oil filter. It will be installed on the engine block just above the driver side axle shaft. Keep the oil drain pan nearby as you reach up to get a grip on the oil filter.

How do you change the oil in a Honda Civic?

Slide the oil drain pan beneath the drain plug so that it catches the oil when you start to drain it. Use a 17 mm box-end or socket wrench to loosen the drain plug. When you’re able to, remove the wrench and loosen it by hand. Be sure to wear protective gloves (and eyewear).

Where is the oil filter on a Honda Civic?

From the underside of the car, locate the oil filter. It will be installed on the engine block just above the driver side axle shaft. Keep the oil drain pan nearby as you reach up to get a grip on the oil filter. Loosen it slowly and carefully, trying to avoid spilling oil.

How do you change the oil in a Honda Accord?

Identify the oil filter and place drip pan under the oil filter to catch falling oil. Using a pair of channel locks, grip the oil filter tightly and twist counterclockwise to loosen. Oil will drip out from the threads as you loosen it so have the oil drip pan ready. Slowly loosen the oil filter by hand until it is free.

How often should I change my Honda Civic engine?

1 Replace engine oil and oil filter every 3,750 miles (6,000 km) or 6 months 2 Check engine oil and coolant at each fuel stop 3 Inspect front and rear brakes every 7,5000 miles (12,000 km) or 6 months 4 Rotate tires every 7,500 miles (12,000 km) 5 Inspect Supplemental Restraint System 10 years after production

Slide the oil drain pan beneath the drain plug so that it catches the oil when you start to drain it. Use a 17 mm box-end or socket wrench to loosen the drain plug. When you’re able to, remove the wrench and loosen it by hand. Be sure to wear protective gloves (and eyewear).

From the underside of the car, locate the oil filter. It will be installed on the engine block just above the driver side axle shaft. Keep the oil drain pan nearby as you reach up to get a grip on the oil filter. Loosen it slowly and carefully, trying to avoid spilling oil.

What kind of oil do you use for a tenth generation Honda Civic?

Here is a detailed breakdown of doing an oil change with a new filter on a tenth generation honda civic. This will work with the 1.5T and 2.0 engines. Make sure to use 0W-20 oil and I would recommend full synthetic. The oil drain plug is 17mm and is torqued to 30 ft lb. or 40nm. The 1.5T uses 3.7 qts of oil while the 2.0 uses 4.4 qts of oil.

When does maintenance light come on on Honda Civic?

In tough driving conditions with a lot of stop-and-go traffic, the maintenance light will come on after about 6,000 miles, which indicates 15 percent of oil life remaining. Warm up the engine to the operating temperatures. This helps to suspend any engine contaminants in the old oil.