Where is the oil filter located on a 2001 Honda Accord?
Locate the oil filter on the rear of the engine. The oil filter on the 2001 Honda Accord is on the rear of the engine straight up from the oil pan. The oil filter is in a horizontal position. Slide the oil catch pan over enough to catch the small amount of oil that will come out of the horizontal oil filter.
Where is the oil filter on a Honda Accord?
Remove protect shield and locate oil drain plug. Put under the car sealabel container to collect used engine oil and remove and remove oil drain plug. Locate oil filter and replace. Oil filter on Honda Accord is located in the front of the car, of the engine like in picture bellow. Remove the oil filter with special oil filter wrench.
How to get an oil change on a 1998 Honda Accord?
Push down firmly on the hood to secure it in place. Allow 12-24 hours for all of the oil to drain out of the old oil filter. Take your old oil and filter to a recycling facility. Most auto parts stores and repair shops accept these at no charge to you.
How to do an oil and filter change?
Oil & Filter Change Honda Accord (1998-2002) – 2000 Honda Accord EX 2.3L 4 Cyl. Sedan (4 Door) 1. Getting Started – Prepare for the repair 2. Open the Hood – How to pop the hood and prop it open
How do you fix a leaking oil filter?
Replace Filter – Add oil to the new oil filter and insert it 8. Remove Oil Cap – Take off the oil fill cap 9. Add Oil – Determine the correct oil type and add oil 10. Replace Cap – Put the oil fill cap back on the engine 11. Leak Inspection – Start vehicle and visually inspect for leaks
The engine oil filter is located on the back of the engine, almost directly above the drain plug. Move the oil drain pan so that it is underneath the oil filter. Unscrew the oil filter by turning it counterclockwise until it comes free of the threads on the engine.
Push down firmly on the hood to secure it in place. Allow 12-24 hours for all of the oil to drain out of the old oil filter. Take your old oil and filter to a recycling facility. Most auto parts stores and repair shops accept these at no charge to you.
How do you replace an oil filter on a car?
Use a clean rag or towel to wipe down the oil filter threads and contact area on the engine. Use your hand to screw the new filter back into place over the oil filter threads. Hand-tighten it until it is snug. Remove the oil drain pan and any other tools from underneath the car.
What to do if your Honda Accord has metal flakes in it?
Metal flakes in your oil could indicate a serious problem inside your engine. While the oil is draining, wipe down the drain plug with a clean rag or towel and remove the drain plug gasket. Replace the drain plug gasket with a new one, making sure that the new gasket fits over the threads and sits against the head of the bolt.