Where is the trouble code on an Oldsmobile?
When retrieving Oldsmobile trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What does the p0343 code on a Chevy mean?
If the PCM does not detect an increase in engine speed, the PCM incorrectly synchronized to the exhaust stroke and will re-sync to the opposite cam position. A slightly longer cranking time may be a symptom of this condition. Need more information on how to fix the P0343 CHEVROLET code?
Why does my GMC Sierra 1500 say service?
If I turn off the engine and wait for 10 min. then start truck everything is ok. and I can turn nob to whatever location I want and it will shift. But I can drive for 3 miles or hundreds of miles and the indicator will eventually come on again no matter what position the transfer case is in.
What does Windows Error code 83 stand for?
Windows error code 83 is a hardware error that makes it impossible to access information on a disk drive. You may get a message after the initial error that says “Abort, retry, ignore or fail?”
Can a 85-13 code still have a VSA light?
Still have the 85-13 Code, still have an engine light that is solid but at times flashing, and still have the VSA light on. Every once in awhile the lights will all go off and the car will run normal then within a few minutes, the condition returns.
What are the GM trouble codes for 2008?
Here is what I have done since Aug. 2008 I have replaced the MAF sensor, air filter, knock sensor, fuel pump, coil, tps, fuel filter, distributor cap and rotor. But guess what I am still having the same codes in this order P0327,P0171, and P0174.
What is the model of your Honda 83?
VSA light and 83-1 ECM/PCM Relationship Failure according to AutoZone guy with a handheld scanner? Mechanic’s Assistant: Just to clarify, what are the exact lights you’re talking about? VSA, a little upside down triangle, and the engine service light. Mechanic’s Assistant: What is the model of your ’83 Honda? Not an 83. It’s a 2008
When retrieving Oldsmobile trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on. 3.
What was the name of the Oldsmobile in 1989?
The 1989 Oldsmobile Silhouette and its sibling models, sold more successfully than the Astro/Safari predecessors.
What is an OBD-II trouble code on a car?
What is an OBD-II Trouble Code? On-Board-Diagnostic (OBD) trouble codes are one way your vehicle communicates with a mechanic. Every car built since 1996 has an OBD computer system that monitors and identifies issues. In particular, it looks for issues that may result in harmful and polluting emissions from exhaust gases.
What kind of transmission did GM have in 1992?
Newly available for 1992 was GM’s 3800 V6 engine coupled with a Hydra-Matic 4T60-E 4-speed electronically controlled automatic transmission. The cowl-mounted fixed radio antenna was eliminated, and an integrated roof antenna was installed, sandwiched between the roof and the headliner.
What causes a check engine light on an air pump?
This will usually only occur after the computer has detected the air pump has completely failed, or an electrical problem with the air pump circuit has occurred. A Check Engine Light can also be caused by other problems, so it is important to have the computer scanned for trouble codes before making any repairs.
What are the symptoms of a bad air pump?
$0.00 1 Engine is running rough One of the first symptoms of a bad or failing smog pump is a rough running engine. 2 Reduced horsepower Another common symptom of a bad air pump is a reduction in power output from the engine. 3 Check Engine Light comes on
Where can I find list of check engine light codes?
If you are unsure of any abbreviations, check out the acronym list by clicking on the link at the left. Next, read our article Automotive Circuit Testing 101, and if there is an article related to the system you are testing, such as Oxygen Sensors or EGR concerns, read these as well.
What are the misfire codes for GM 3.8L?
Here are some of the most common symptoms of a misfire condition on your GM 3.8L: The check engine light will be on. One or more misfire codes will be stored in the car or mini-van’s computer memory (if OBD II equipped). P0300 Random Cylinder Misfire. P0301 Cylinder #1 Misfire. P0302 Cylinder #2 Misfire. P0303 Cylinder #3 Misfire.
If you are unsure of any abbreviations, check out the acronym list by clicking on the link at the left. Next, read our article Automotive Circuit Testing 101, and if there is an article related to the system you are testing, such as Oxygen Sensors or EGR concerns, read these as well.
Here is what I have done since Aug. 2008 I have replaced the MAF sensor, air filter, knock sensor, fuel pump, coil, tps, fuel filter, distributor cap and rotor. But guess what I am still having the same codes in this order P0327,P0171, and P0174.
What does code 12 mean on GM OBD?
The system will enter the diagnostic mode. In this mode, the computer will display a Code 12, three consecutive times, by flashing the “CHECK ENGINE”, “SERVICE ENGINE SOON” or “MALFUNCTION INDICATOR LAMP” or light. A Code 12 consists of one flash, a short pause, then two flashes in rapid succession.
What is the code for service engine soon?
In this mode, the computer will display a Code 12, three consecutive times, by flashing the “CHECK ENGINE”, “SERVICE ENGINE SOON” or “MALFUNCTION INDICATOR LAMP” or light. A Code 12 consists of one flash, a short pause, then two flashes in rapid succession. 2.