Which is Mack fuel pump for E7 series?
New in the Box Mack Fuel Injector Pump for E7 Series 313GC5227MX Bosch 0986445001 Bosch injection pump 0 402 746 883. Please see pictures.
What kind of pump is in a Mack truck?
Bosch injection pump 0403 446 123. We have many other parts available from this vehicle. MACK E7 FUEL INJECTOR PUMPS // OEM# 313GC5227M Bosch 0414755003 0986445004 0414755002 0986445001 Mack 313GC5227M 313GC5227MX
Where can I get a Bosch injection pump?
Bosch injection pump 0 402 746 883. Please see pictures. We have many other parts available from this vehicle. We ship Nationwide. Please call for a shipping quote or any other questions you may have. Thank you. Bosch injection pump 0 402 746 883. Please see pictures. We have many other parts available from this vehicle. We ship Nationwide.
What causes fuel injection pump to back up?
The spray tip (where the fuel leaves the injector and enters the combustion chamber) is particularly prone to “backing up,” so to speak. If your engine has ever sputtered or hesitated during acceleration, a clogged fuel spray tip might be the glitch. And it all starts with subpar diesel fuel.
What’s the problem with my Mack E7 engine?
Sounds like it might be a timing issue. Is the engine fully mechanical, or an electronically controlled in-line fuel injection pump like our ’95 E7 is? There is an electronic timing advance situtated between the f.i. pump and timing case. Which pump got replaced? The fuel injection pump, or just the primer/fuel supply pump?
Why is my Mack E7 blowing white smoke?
At work we have a 97 E7 mechanical and shes not runing too good. just sitting if you give it throtle it gets up to like 1500 rpms and starts sputering and blowing white smoke. Its got 300k or so miles on it. New pump and injectors. Could there be an adjustment on the pump or something thats out?
What is the timing scale on an E7 engine?
Manually rotate the engine in normal rotation direction until pointer in flywheel housing aligns with valves 1 and 6 mark on the flywheel and the No. 1 piston on the compression stroke. The flywheel has a stamped timing scale consisting of TC through 45 degrees of engine travel for setting and checking pump-to- engine timing.
How do you adjust the yoke on an E7 engine?
To adjust the yoke and valves on these engines, bar engine in normal rotation direction until the TC mark on the damper (with the No. 1 piston on the compression stroke) aligns with pointer marked VALVE. This provides the 30-degrees-after-TDC relationship for valve lash adjustment necessary with the E7 camshaft design.