Why are the brake lights on my Chevy 1500 not working?
My 1994 chevy 1500 brake lights, head lights, front parking lights and front and rear turn signals work……TAIL LIGHTS do NOT work…..have checked fuses and bulbs…..What could the problem be??? If you have checked to be sure there is 12V to the lights check further to be sure there is a solid ground path.
How can I Fix my Chevy C / K 1500?
It is a problem that you can probably fix your self using a pair of wire strippers or a utility knife (be careful though), new snap connectors and safety glasses if you don’t mind using a creeper to slide under the rear of the truck’s bed. However, your local full service U-haul dealer can probably assess the problem for you for free.
Why are my tail lights not working on my Chevy C / K 1500?
Also, check your ground wire connections in the wiring harness as well. These problems can often result from the installation of after market trailer wiring harnesses where improper connections have allowed corrosion to enter the wire at the splice points. 30 people found this helpful. Check the ground Wire under the bed in the back.
Where is the voltage regulator on a Chevy truck?
Beginning around 1950, some vehicles have a small voltage regulator behind the dash that supplies a stable voltage supply for the instruments – something less than the battery voltage of six (or 12) volts. This isolates the instruments from the effects of varying battery and generator voltage.
What to do if your brake lights are not working?
Ok, changed out turn signal switch and still have no brake lights. Again, i changed the bulbs, replaced the brake switch, and replaced the turn signal switch. The parking lights work, the blinkers work, the back-up light works, and the hazzards work. But still no brake lights.
Where are the 3rd brake lights on a Chevy 1500?
The 3rd brake light is on a seperate circuit from the brake lights . Test for power at the brake switch.Orange is 1 and white is the other,they are next to each on the switch.If that checks out try fiddling with the hazards and turnsinals since the brake light power flow goes form the brake switch to the turnsignals.
Where do the brake lights go in a car?
The way those taillights work theres a white wire under dash on the column that white wire is for brake light. So the way the brake lights work they go through a relay and through blinker switch.