Why is my odometer and message center not working?
If both the odometer and message center are not working, the problem is likely to be a fuse (both of these displays share the same fuse.)
How does tampering with the odometer work?
This type of tampering is not like odometer rollback, the vehicle owner would just shut off the switch for a few months while driving so the mileage wouldn’t rack up, and if the driver need to see the speed of the vehicle at any time, that’s all they would have to do is turn the switch on for a few seconds, check their speed and then turn it off.
Can a replacement odometer show the original mileage?
The odometer replacement sticker will have the original mileage hand written on it from the tech who replaced the meter. The repair order will also have the original mileage and date on it, the repair order is a legal document, and it is proof of original mileage. The new odometer will start clocking mileage from that point starting at zero miles.
Where do I put the odometer replacement sticker?
The usual area for this type of sticker would be in the driver’s door jamb area, common placement of this sticker is near the VIN plate in the driver’s door jamb, it will be noticed as soon as you open the door. The odometer replacement sticker will have the original mileage hand written on it from the tech who replaced the meter.
What to do when your odometer has zero miles on it?
When a shop/garage has to replace a digital odometer, the replacement odometer sent from the factory has zero mileage on it, so the odometer needs to be sent out to a professional speedometer facility to have the mileage from the old odometer transferred onto the new odometer. The process is not complex, but it is time consuming.
Can you tell if your odometer has been tampered with?
If a vehicle has a good documented service history, you can be confident that the odometer mileage has not been tampered with. Sometime a digital odometer will fail; as a result, it will have to be replaced.
Why is the odometer on my car not working?
It is used to determine distance traveled and due to previous problems with individuals and dealerships disconnecting the odometer, it is a federal offense to tamper with it. The odometer is used to give consumers information on how many miles are on the engine of a vehicle.
Do you have to put an odometer replacement sticker on your car?
If a digital odometer is replaced legally, the mileage doesn’t have to be synced onto the new odometer, but the shop or garage doing the work will have to install an odometer replacement sticker somewhere very noticeable in the vehicle.
Where is the odometer located on a PRND321?
Carefully pry the board away from the instrument cluster – it is held in place only by the pins of the stepper motors (labelled on the image)… but BEWARE, there is another small wire harness on the right and side of the board. The last thing is to gain access to the back of the LCD panel.
How to repair the odometer on a GM Truck?
Insert the key into the ignition and turn to “ON” – you don’t have to fire up the truck, but you will need to turn the key enough that you can move the gear stick down to the lowest position. Using the steering wheel’s height adjustment, move the steering wheel to the lowest position. Finally, remove the dashboard surround.
How to repair the odometer on a Chevy Avalanche?
In this Instructable, I will show you how to repair odometer/gear select (PRND321) LCD on your GM truck. In this case, mine is a ’02 Chevrolet Avalanche but this should apply to all GMT 800 series trucks within this age range. A common fault on ’99 – ’02 GM trucks was the permanent or intermittent failing of the odometer/gear select LCD.
If both the odometer and message center are not working, the problem is likely to be a fuse (both of these displays share the same fuse.)
What kind of car has no digital odometer?
I drive a 2001 Buick Century. Sometime last month (or maybe the month before), my digital odometer was on the fritz. There’s a little sub-partition to my dash that houses my digital odometer as well as the indication as to what gear i’m in (PRND32). So it started fading a little, then on some days it wouldn’t light up at all.
When does the odometer go on on a traverse?
So on our 2011 Traverse the display works at night with when the headlights are on but not during the day. If we cover the light sensor on the dash during the day after a few seconds the headlights, and odometer come on. It will stay on until we uncover the sensor and then goes out when the headlights go out.
How do you repair an odometer on a car?
Lining up the pins of the stepper motors with their corresponding sockets on the PCB, push the board back onto the instrument cluster. Put pressure on the back of where the stepper motors are (see photo). Replace the back plastic cover of the instrument cluster, ensuring all clips are secured.
How to fix non working odometer and gear selector display?
Here is how you fix a non working odometer and gear selector display (PRND321). It is very simple, just remove the cluster and find a bad solder on the wire going to the odometer/gear selector display.
Is there a way to repair a Ford odometer?
This video demonstrates the repair of a Ford odometer that was intermittently working. This repair was performed on a 2003 Ford F-150 pick-up truck but the process should be similar on other Ford truck and SUV models of the late 90’s through early-mid 2000’s.
Where is the speedometer and odometer located?
If both your odometer and speedometer are not working, then it’s likely your speed sensor needs to be replaced. These are easily installed and located near the back of your transmission.
Is it dangerous when odometer is not working?
Odometers are significant because when you purchase or sell a vehicle, a large portion of the vehicle’s value is based upon the vehicle mileage, which is read off the odometer. Driving without a fully functioning odometer is perfectly safe, but if you plan to sell the vehicle any time soon, have the odometer fixed.
What would cause the odometer only not to work?
But the plastic gears that turn an analog odometer have a tendency to break, which causes the odometer to stop spinning. The good news is that this is an easy fix, as demonstrated by YouTuber Chris Fix. If both your odometer and speedometer are not working, then it’s likely your speed sensor needs to be replaced.
Why does my odometer not work?
When your odometer ceases to work, most people assume they must replace the unit, which can get quite expensive. However, you can repair an odometer fairly easily. The odometer stops working because the gear within the odometer has worn out.
Why would the speedometer and odometer stop working?
If both your odometer and speedometer are not working, then it’s likely your speed sensor needs to be replaced. These are easily installed and located near the back of your transmission. If only your odometer is busted, then it’s likely the gears that turn the odometer have broken.
Lining up the pins of the stepper motors with their corresponding sockets on the PCB, push the board back onto the instrument cluster. Put pressure on the back of where the stepper motors are (see photo). Replace the back plastic cover of the instrument cluster, ensuring all clips are secured.
Carefully pry the board away from the instrument cluster – it is held in place only by the pins of the stepper motors (labelled on the image)… but BEWARE, there is another small wire harness on the right and side of the board. The last thing is to gain access to the back of the LCD panel.
Why is the shift selector inticator light not working?
Or, a blank PRNDL display may also occur if an out of line condition exists with the Serial Data Circuit (CKT 2470, yellow wire) from the TCM to Splice Pack 205. Connect the Tech 2® to the vehicle. Power up the Tech 2®.
Why is my odometer not working on my Dodge Ram 1500?
My speedo was possessed, fluctuating while parked and the odometer was advancing, also while parked. The ABS, Check engine, and Brake lights were all on. I first bought a new CPU. wasn’t the problem and took it back, tried a new Gauge cluster from a friends truck, still nothing.
How to fix an odometer that doesn’t spin?
The odometer gear can easily be repaired by taking the gauges out from the dashboard, but I also show you how to replace the speed sensor. Since we are taking the dash apart, I show you how to install LED bulbs for your instrument cluster. Fix a Loose Column http://www.youtube.com/watch?v=LKqiDy…
What to do if your car has an odometer problem?
Here’s what you need to do to reset the cluster: 1. Disconnect battery terminal 2. Unplug electrical connector on the back of the cluster 3. Re-connect the electrical connector on the back of the cluster 4. Re-connect battery terminal It should now be in the default state.
What to do if your odometer is not working?
To fix it, I “jumped” power from the row above at fuse #6 or 7 it was a blank “not used fuse” that only gives power when the ignition is on. (tested with light) I simply stripped both ends of a short wire and jumped it from top terminal to top terminal. Probelm solved…got my speedo, odom back, and brake n abs light off.
Why is the ABS light and brake light not working?
I have a 1998 Dodge Ram 1500 Both the ABS light and the brake light are on. Changed the Speed sensor on the differential it didn’t help. I did replace the RWAL/ABS fuse and now the speedo works. Next I’m checking the front wheel sensors after that idk what to try. Any advise would be helpful. I have a 99′ Dodge RAM 2500.
In this Instructable, I will show you how to repair odometer/gear select (PRND321) LCD on your GM truck. In this case, mine is a ’02 Chevrolet Avalanche but this should apply to all GMT 800 series trucks within this age range. A common fault on ’99 – ’02 GM trucks was the permanent or intermittent failing of the odometer/gear select LCD.