Why is my radio on but there is no sound?

Radio comes on, no sound (or it would make a loud static sound if you hit the radio or ramdomly on it’s own), everything else is fine, display, CD works etc.. So I bought an identical used replacement radio on ebay, still not working and the same problem.

What to do if your speakers are making noise?

Check each speaker individually by using the balance and fader controls. If only one speaker is causing the noise and it is a buzzing or distorted sound make sure there is nothing pressed up against the speaker. If only one speaker is the problem, the speaker may need to be replaced.

Why is my speaker not connecting to my amp?

The issue could be related to the amp if you have an external amp or the speaker wires. Depending on where your amp is located, it may be easy or quite difficult to check the amp. Some amps have in-line fuses while others are fused at the amp itself, and some installations have more than one fuse.

Why does my car radio stop working when I open the door?

In some cases, a broken wire or bad connection in the speaker wires where they pass through into a door can also cut off the sound altogether rather than just cutting off the sound to one speaker. If you find that your sound comes back on if you open and shut the door, that may be the problem, or it could be a ground issue.

What to do when stereo sound is not working?

1. Press Windows key + R keys together from the keyboard. 2. Write mmsys.cpl in it and click OK. 3. Now, right click on the device which is being used as a sound device and on which stereo sound is not coming. For example, if you are not receiving stereo sound from speaker.

Is the radio on but no sound through the speakers?

My radio is on but no sound through the speakers. Checked… 2005 yukon xl denali bose radio no sound. Replaced amp and 2005 yukon xl denali bose radio no sound. Replaced amp and radio still no sound … read more Vocational, Technical or Tra… Vocational, Technical or Tra… Vocational, Technical or Tra…

How can I tell if my speakers are left or right?

Left / Right (Stereo) Sound Test Background A simple stereo test which checks if your speakers are correctly associated with their respective channels. When your audio connectors are color-coded, red is associated with the Right channel, by convention.

What is the left and right stereo sound test?

Left / Right (Stereo) Sound Test. Background. A simple stereo test which checks if your speakers are correctly associated with their respective channels. When your audio connectors are color-coded, red is associated with the Right channel, by convention.

What to do if your car stereo has no sound?

Radios have all sorts of wires going in and out of them. Each wire serves a specific purpose for the car stereo to operate correctly. If you have a car stereo that has no sound than we should start by checking that all the wires are hooked up. A car stereo will always have 3 different power wires going to the deck section.

Why does my Chev Silverado have no sound?

No sound from speakers, but the radio is showing volume and station. Pop the hood and find the fuse that says “radio.” Pull it and flip it around the other direction and put it back in. There is also one that says “radio amp.”

What to do if there is no sound?

Having same issue with sound tried fuses tried reset done reboot on uvo touch screen tried battery cable ….nothing have appt today at 1 and of coarse it not warranty 36000 im at 47000 anyone know the cost of resolving this issue 1 people found this helpful. Luckily had extra insurance that covered the cost for amp replacement.

Why is there no sound when playing audio CD?

Why is there no sound when I try to play an audio CD with RealTimes (RealPlayer)? 1 Double-click the speaker icon next to the clock in the lower-right corner of your screen. 2 In the Volume Control dialog box, make sure that all of the Mute boxes are clear. More …

What kind of noise is coming from my speakers?

Noise can be static, whine, hiss, distortion, or other sound issues. Make sure to check ground wires . Check the ground wires to all of the components in your system. This may include the receiver (head unit), external amplifier, equalizers, or other components.

What do you do when there is no sound coming from your radio?

Started the car, pulled the fuse, waited one minute, turned OFF the car, put the fuse back in, restarted the car. Everything worked great. BTW, it is the 20A Multimedia Fuse on the 2013 Elantra Ltd. 59 people found this helpful. Paper clip also worked For 2012 Elantra Ltd.

Why does my car stereo have no sound?

This can be due to your car stereo overheating or shorting out. This means that your radio has burned up and will no longer function. Because it no longer is obtaining any power, it cannot produce signals to the speakers so you have sound. If you’re still wondering why and how to fix a car stereo that has no sound, we’re moving onto the final step!

Why does my car radio suddenly stop working?

If you have a car radio that works sometimes, and suddenly cuts out at other times, that can be more difficult to diagnose. If your radio turns on, but you don’t get any sound from the speakers, there are a whole lot of different potential culprits.

Why is my radio on but no sound from the trunk?

Both radios come on, and can change screens, and the back up camera works too. This is a VAN, so there isn’t any amp in the trunk. No sound in any of the speakers. The connections to the car wiring are good, and even blew out the connections with compressed air to ensure a clean seating with the wiring.

Why is the sound not working on my Toyota?

This Toyota has an entertainment fold-down DVD player that was installed at the dealer. SYMPTOM: Head unit appears to be work, however no sound is playing through any speakers. Also, entertainment fold-down DVD player is not working. PROBLEM: Toyota head unit is designed to stop playing sound upon any connection errors.

Where is the sound on my 2013 Camry SE?

2013 Camry Se have no sound right side speaker up one and passenger side foot. Happened after i was add the twitter, i took out twitter now i add ground it working but wind sounds , all others speakers working perfect . I look at all the fuse Perfect ! any good advice thanks.

Why is my Sirius Satellite Radio not working?

If you are not getting any sound from the SIRIUS Satellite Radio® receiver, there may be a loose connection or an incorrect setting. Try the following steps to troubleshoot this issue:

Is the radio still working but no sound from the speakers?

Vocational, Technical or Tra… 2002 dakota with RAZ cd/tape radio no longer has sound from front speakers. Now, 1 of the rear speakers is going in and out. … read more

Why does my radio not work in my car?

For instance, if your radio turns on and displays a station, but no sound comes out of the speakers, then it’s probably an issue with the speakers or the wiring or even the antenna. In that same vein, a car stereo with a non-functioning radio may be tracked down to an antenna problem if other audio sources, like the CD player, work just fine.

Is the radio still working on my 2002 Dakota?

2002 dakota with RAZ cd/tape radio no longer has sound from front speakers. Now, 1 of the rear speakers is going in and out. … read more Automotive Diagnostic Spe… 2013 Charger Pursuit. Base 6 speaker stereo. No external 2013 Charger Pursuit.

Why is the radio not working in my Subaru Outback?

The short had not blown any fuses nor had it damaged the radio. Instead, the final amplifier circuit had cut out automatically when it sensed the low resistance between one of the speaker wires and chassis ground. I have nearly the same issue with my 2004 Subaru Outback wagon.

Why is the radio not working on my corolla?

Our 2012 Corolla lost all sound but the radio still showed as working including bluetooth, CD, etc. My husband had put tires in the trunk to get our snow tires changed and sure enough knocked off the speaker wire and it grounded out.

What to do when your car has no sound?

SOLUTION: Disconnect the axillary device on rear of head unit, check speaker connectors (especially if your Toyota type has a trunk as the speaker clips are exposed and can be *hit by items in the trunk). In my specific situation, the Toyota installed DVD player in the back malfunctioned and put the head unit in this (NO SOUND) mode. Good luck.

Why does my car radio have no sound?

The NO SOUND problem is a known issue with ML’s. It is caused by an internal fault with the fiber optic connection. I sold the MCS. I really didn’t like the way it was designed for the right-side drive as it was. I should be getting my new radio in later this week! Pretty stoked about that. Merry Christmas! :dance: Click to expand… Smart move !

Why does my Mercedes 350 have no sound?

My ML 350 is not having sound but everything lights up. Trying to see if I can tighten The NO SOUND problem is a known issue with ML’s. It is caused by an internal fault with the fiber optic connection. I sold the MCS. I really didn’t like the way it was designed for the right-side drive as it was.

Who is Bob from factor factory stereo repair?

His name is Bob from Factor Car Stereo Repair ( Factory Car Stereo Repair, Inc. – BOSE Stereo and Speaker / Amplifier Repair ). There is a terrific video explaining the fiber optic system in the Mercedes.

When did the sound on my Radio stop?

When it happened, the sound was slightly distorted and then just disappeared instantly and has stayed away. The radio is meant to be of reasonable quality and is only about 18 months old. Any pointers would be greatly received.

Where does the sound from the radio come from?

No sound from turn signals and radio out. The turn signal noise comes from the tweeters which is the same place that the voice from movies comes from…point being i’ve had continuos problems with the sound going out during movies…try pressing the band button on the radio and dvd/cd button alternatly when the turn signal “noise” goes out.

What to do if there is no sound on internet radio?

You have two audio drivers, which may be conflicting. And as your Intel driver is also your video driver, I’d try disabling the Conexant HD driver. To do this go back to Device Manager, select the Conexant driver, right-click and select Disable (not uninstall). See if that makes any difference.

For those of you that didn’t know, most radios have fuses in the back that can blow. Usually when this happens though the radio will lose all power and you won’t have sound at all. Verify your fuses behind the radio, and in the vehicles fuse panels as well. Replace any blown fuses and see if the radio kicks on and produces sound.

How is the display on a car radio connected?

The display of the radio is connected with the radio with specific wires. Some car radios have wires between the display panel and main unit of the radio while some are soldered on the board. Every radio has a different type of connection between the display and the main unit of a car radio. Two ways can connect the display of the car radio.

Why is the dimmer on my car radio not working?

Sometimes, the dimmer is not adjusted according to the requirements of the person using the car radio. And because of the issue, the driver cannot properly see the display of the car radio. The best solution for this problem is to locate the dimmer button on the car radio.

Why does my Jeep Wrangler radio have no sound?

There are software updates for some of the radios to address a number of problems. Everything was working perfectly fine when I parked it in the garage. Start it up this morning and suddenly there’s no sound. Tried every source (XM, FM, CarPlay, Media, etc) and its the same story.

What to do if your CB radio has no power?

CB Radio Has No Power. No lights come on the radio. There is also no sound. You cannot transmit or receive. Check Power Cord Connections. Make sure the power cord connections are attached correctly. If your radio has a power plug, make sure it is seated well. Check Fuse. Make sure the CB radio’s fuse is not blown and that it is seated correctly.

Why is there no sound on my digital radio?

Whilst playing my digital radio on full volume, the sound suddenly stopped. Everything else still works: all lights, LCD display, channel selection, tuning, just absolutely no sound. When it happened, the sound was slightly distorted and then just disappeared instantly and has stayed away.

Why is my car radio display not working?

Your car radio may have damaged connectors that are not able to transmit power and information to the display LED, and it is not able to work. There can be several possible reasons that can cause the connectors of the LED to stop giving power. The main reason for the damaged connectors can be a loose connection of wires of the connectors.

What to do when your car radio has no sound?

Usually when this happens though the radio will lose all power and you won’t have sound at all. Verify your fuses behind the radio, and in the vehicles fuse panels as well. Replace any blown fuses and see if the radio kicks on and produces sound. If you have power to the radio officially but yet you still have no sound, then continue on.

How to troubleshoot poor or no AM or FM radio reception on your car?

How to troubleshoot poor or no AM or FM radio reception on the car stereo. IMPORTANT: It is recommended that all car stereo installations be performed by a qualified, professional installer. NOTE: If model-specific information is needed to complete any of these steps, refer to the instructions supplied with the product.

Is there any sound coming from my VW radio?

Ask Your Own VW Question Customerreply replied 9 years ago nope. for the past couple months sometimes the radio would just quit putting out sound (power was on it would just lose sound). I would turn it off and then back on and it would work fine. Now it has power and reading cd’s and radio stations just no sound.

Navigation