How do I descale my Philips steam generator iron?
Easy De-Calc Function
- Unplug and let it cool completely — at least 2 hours.
- Place the steam generator at the edge of a table or sink. Hold a cup (at least 350 ml) under the EASY DE-CALC knob.
- Remove the knob.
- Put the knob back in place and turn clockwise to tighten.
- You are now ready to keep ironing!
Why is my Philips iron not steaming?
If the water level on your Philips Steam Generator Iron is below the minimum level or there is no water in the tank, your iron is not able to generate steam. Ensure that there is water in the tank or that the water is above the MIN level icon. After this, your iron should work again.
How do I clean my Philips iron water tank?
1) Fill the water tank halfway with warm water and shake it carefully. 2) Empty it and rinse well with fresh water (do not use detergent). Note: Algae can form when water remains in your iron’s tank for a long time. Emptying your Philips Steam Iron’s water tank regularly will prevent the formation of algae or residue.
How do you descale a steam iron?
How to deep clean your Steam Generator Iron
- Tilt the base, remove the EASY DE-CALC knob and pour in 500ml of water.
- Tighten the knob back in place, switch on your steam generator and wait 5 minutes.
- Press and hold the steam trigger whilst ironing a piece of cloth.
Is it bad to leave water in iron?
Care for and Maintain Your Iron Tap water can leave behind minerals that will clog your iron, damage the reservoir and cause rust stains on clothing. Always empty the reservoir when done ironing. Even distilled water will cause buildup if it’s left inside the iron.
How do you descale an iron without vinegar?
Baking soda is a miracle worker that cleans everything from ovens to dishwashers. It can also clean your iron. Create a stain-fighting paste with just two tablespoons of baking soda and one tablespoon of water. Carefully rub it around on the iron plate, but try not to get baking soda in the steam holes.
Can you put vinegar in a steam iron?
5. Add Vinegar to the Water Reservoir. If you have a steam iron, another way to clean out the iron steam vents is to fill the water reservoir with a mixture of half distilled white vinegar and half water. As you steam, residue will come out of the vents along with the vinegar.