How do I turn off the check TPMS light?
Drive the car at 50 mph for about 10 minutes. This should reset the sensor, and the next time you start the car the TPMS light should be off. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it.
What does it mean when your TPMS warning light is on?
So check your tires carefully. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.
When to check tire pressure with TPMS system?
The indirect systems are also much more prone to false alarms, which can be caused by something as simple as irregularities in the road, or worn shocks. Whenever the TPMS warning light comes on you should check all of your tires (the spare too, as some systems monitor that as well) at your next stop.
Why is my tire pressure sensor warning light on?
Disturbed or Tripped Sensor. If you’ve recently had your vehicle serviced and the tire warning light activated immediately or shortly after, it’s likely that something tripped one or more of the tire pressure sensors. Some models require the TPMS to be reset after adding pressure.
What causes a TPMS sensor to go bad?
There are some quite noticeable changes in the vehicle when a TPMS sensor goes bad. It can be due to dirt, dust, heat, etc. that can lead to it malfunctioning. Here are some of the most common symptoms of a bad tire sensor system:
So check your tires carefully. If your vehicle has a TPMS, it’s probably monitoring the pressure in your spare tire. Therefore, if you get a low tire pressure warning light, and if you’ve checked all four tires that are touching the ground, than you might need to put some air in the spare.
How does a tire pressure sensor ( TPMS ) work?
Tire Pressure Sensor (TPMS) Symptoms, Function & Location. The tire pressure measures the pressure in your car’s tires. It sends over the information to the car’s onboard computer, which analyzes the information and makes proper adjustments.
Disturbed or Tripped Sensor. If you’ve recently had your vehicle serviced and the tire warning light activated immediately or shortly after, it’s likely that something tripped one or more of the tire pressure sensors. Some models require the TPMS to be reset after adding pressure.
How do you check the TPMS system on a car?
It is important check the TPMS system before working on a customer’s vehicle. Using a TPMS diagnostic tool, select the vehicle’s make, model and year manually – or for faster service, scan the vehicle’s VIN barcode located on the placard on the vehicle doorjamb to read the sensor information.