How do you get lower control arms torque?
2. Using a suitable jack, support the front wheel knuckle at the rear lower ball joint. 3. Remove the front lower arm-to-subframe bolt and washer and remove the front lower arm. Discard the bolt and washer. To install, tighten to 65 Nm (48 ft. Lbs.), Then tighten an additional 90 degrees.
What are torque specs for Chevy Tahoe control arms?
However having hard time finding torque specs for control arms. My chiltons manual does not go into that detail. 2001 z71 tahoe? just make sure you have the bushings loaded before you torque them down to proper spec, otherwise, you will tear them or that is the theory.
What are the directions for lower control arms?
Note, the directions for the rear will start with the upper control arm and the lower will follow. Pictures starting with the eighth one will correlate with these directions. CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major service expense.
What is lower control arm?
A lower control arm is designed to act as a support between the car frame and the spindle which is where the tire is located. Every car is designed with control arms no matter if it is conventional, hybrid or electric.
What is tubular control arm?
Heidts tubular control arms are designed to provide the ultimate in strength, stability, and appearance. They are TIG-welded and arrive fully assembled and ready to install, with ball joints, bushings, and hardware included.
What is a rear control arm?
Rear control arms bolt up to the upper part of the differential housing and connect to the body. Their main purpose is to support the up and down movement of the axles. The lower control arms also transmit the force from the wheels to the chassis. Of course, control arms are much lighter,…
What do control arms do?
Control Arms. The primary function of a control arm is to provide the connection point between the body of the vehicle and wheel. This allows the wheel to move up and down while the body frame and passengers stay smooth and level. Key components that are normally found on a control arm include the control arm bushing and the ball joint.