How do you install clutch on AC compressor?
Make sure they line up before installing clutch to compressor shaft. Offer up clutch install tool. The front of the tool (blue arrow) screws over the threads of the exposed 9/16-inch shaft stud (yellow arrow). The nut then forces the bearing (red arrow)against the clutch face, forcing it onto the compressor shaft.
How does a GMC air conditioner compressor work?
General Motors automobiles use a compressed freon air conditioning system that has a rotating compressor driven by the engine. This compressor requires internal lubricant that usually leaks out of the many joints and gaskets of the system; loss of this lubricant can damage the compressor bearings.
How do you replace the AC clutch on a car?
The objective is to replace the AC clutch on the car. Remove the AC compressor’s front and rear bolts only. Lift the front of the compressor up to clear the top radiator support. Maintain the compressor in that position by placing a block of wood between the front of the compressor and the top of the engine.
What causes a locked clutch on an AC compressor?
The AC compressor exhibited no unusual symptoms that would explain the locked clutch, there was no bearing failure, no unusual noise, no smoke, no fire. On the contrary, the AC continued to work properly.
Make sure they line up before installing clutch to compressor shaft. Offer up clutch install tool. The front of the tool (blue arrow) screws over the threads of the exposed 9/16-inch shaft stud (yellow arrow). The nut then forces the bearing (red arrow)against the clutch face, forcing it onto the compressor shaft.
How do you replace a GMC air conditioner compressor?
Disconnect the freon lines from the compressor by turning the line bolts counterclockwise using the line wrench. Store them out of the way, but leave them connected to the other air conditioning equipment. Remove the drive belt from the compressor’s pulley wheel by pressing the tension pulley arm firmly and sliding the belt from the idle pulley.
The AC compressor exhibited no unusual symptoms that would explain the locked clutch, there was no bearing failure, no unusual noise, no smoke, no fire. On the contrary, the AC continued to work properly.
The objective is to replace the AC clutch on the car. Remove the AC compressor’s front and rear bolts only. Lift the front of the compressor up to clear the top radiator support. Maintain the compressor in that position by placing a block of wood between the front of the compressor and the top of the engine.
What happens when the AC clutch does not work?
An automobile can have numerous serious problems and a dysfunctional AC compressor clutch is one of them. When this component does not work properly, the engine does not get the cold air flow – leading to some major complications. Knowing how to manually engage AC compressor clutch will help you skip a visit to the mechanic.
Does my a/C compressor need to be replaced?
The compressor will eventually need to replaced in a home air-conditioning system that is used often. If you’re air-conditioning unit is having issues and you’ve diagnosed it as a problem with the compressor, you can replace it yourself with these steps.
How to tell if a/C clutch is bad?
- Step 1. Shift the vehicle into neutral or park. Engage the emergency brake. Raise the hood. Touch the positive lead of a voltmeter to the positive
- Step 2.
- Step 3.
- Step 4.
- Step 5.
How do you replace an AC compressor clutch?
How to replace an AC Compressor Clutch. To remove the clutch, screw in the removal tool and hold the clutch disc with the holding tool. Use this tool to hold the AC clutch disc while you remove the pulley. Remove retaining nut on the compressor shaft while holding the clutch disc with the holding tool. Then install the clutch disc puller.
Can you run car without a compressor clutch?
if the clutch and/or pulley on your compressor are okay, yes, you can continue to operate your vehicle without any issues…without a compressor you will need a bypass pulley and special length of belt.