How do you remove the gear knob on a Volvo 240?
You need to remove the top half of the shift handle first on the early style shifter. Then push down on the spring washer and slide the button forward off of the shaft. Remove the spring and washer, then pull the lower knob off.
How do you remove the gear knob on a Volvo c30?
Simply pry the base of the gearshift boot up and out of the center console and then push down on the knob and turn it counter-clockwise. This unlocks the knob from the gear lever.
When did Volvo remove the gear shifter knob?
Volvo Gear Shifter Knob Removal – YouTube 2009 XC70 T6 Gear shifter knob removal. 2009 XC70 T6 Gear shifter knob removal. AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features © 2021 Google LLC
How to remove a cylinder head from a Volvo?
1 Cooling system drained; refer to Coolant, Change page 187. 2 Oil drained. 3 Remove the air filter housing. 4 Remove the turbocharger according to Turbo, Change page 174. Manifold, Change page 152. 6 Remove the inlet manifold; refer to Intake Manifold, Change page 143. 7 Remove the thermostat housing; refer to 26-2, Thermostat Housing, Change.
How do you drain a 5 cylinder Volvo?
A torque wrench and angle gauge. Drain the coolant from the pet cock that is right behind the #1 cylinder. You may not be able to see it, but it takes a 13mm box end wrench and will drain the engine. I don’t drain the radiator since those plastic plugs on the bottom the radiator are breakable plastic.
How are pistons measured on a Volvo engine?
All pistons must be measured at TDC. Piston height above the Volvo engine block must be measured at measuring points (1) and (2) on all pistons. Pay attention to the measuring points, since the piston crown is domed. 16 Check that the piston is in its uppermost position, TDC. Place the dial indicator on the piston at measuring points (1) and (2).