How to do idle relearn in a Subaru?
10) Start the engine and leave to idle for a further 5 minutes without touching the accelerator and without turning on other systems in the car. 11) Turn off the engine again and wait at least 20 sec before restarting. 12) Take the car for a test drive as the ECU should now be fully retrained. Loading…
How do you idle a 2009 Subaru Forester?
The Subaru in this video is a 2009 Subaru Forester. 1) Turn off the lights, aircon, stereo or any system in the car that draws extra current on top of the engine. 2) Disconnect the battery for 30 mins. 3) Reconnect the battery. 4) Before you start the car for the first time, turn the key to the ON position but do NOT turn the engine over.
How to Idle re-learn after battery ( all years )?
1) Turn off the lights, aircon, stereo or any system in the car that draws extra current on top of the engine. 2) Disconnect the battery for 30 mins. 3) Reconnect the battery. 4) Before you start the car for the first time, turn the key to the ON position but do NOT turn the engine over.
Why is my Subaru Outback running rough at idle?
Engine was running rough and surging at idle and would eventually stall. It needed head gaskets, timing belt etc. so I pulled the engine and did all the work. All went well and after putting it back together it still has the same surging issue which is not surprising.
What should the PSI be on a Subaru Outback?
The scan tools I use default to psi. With 20 kPa at idle, that relates to approximately 3 psi. Given the engine should be pulling about 18 inHg at idle, that transfers to about 8-9 psi or 55-60 kPa. The ECM is fueling the car for dense air or high volume how ever you want to look at it and its flooding the combustion with fuel.
10) Start the engine and leave to idle for a further 5 minutes without touching the accelerator and without turning on other systems in the car. 11) Turn off the engine again and wait at least 20 sec before restarting. 12) Take the car for a test drive as the ECU should now be fully retrained. Loading…
The Subaru in this video is a 2009 Subaru Forester. 1) Turn off the lights, aircon, stereo or any system in the car that draws extra current on top of the engine. 2) Disconnect the battery for 30 mins. 3) Reconnect the battery. 4) Before you start the car for the first time, turn the key to the ON position but do NOT turn the engine over.