How to fix non working odometer and gear selector display?

How to fix non working odometer and gear selector display?

Here is how you fix a non working odometer and gear selector display (PRND321). It is very simple, just remove the cluster and find a bad solder on the wire going to the odometer/gear selector display.

Why is the odometer on my GM Truck not working?

A common fault on ’99 – ’02 GM trucks was the permanent or intermittent failing of the odometer/gear select LCD. This meant that you were unable to see what gear you were currently in, unable to determine the mileage of the vehicle, and unable to use the trip computer.

How to repair the odometer on a GMC PRND321?

The instrument cluster is held in place by four (4) 7mm hex screws, one in each corner. Remove these. Tilt the instrument cluster forward carefully, and unlatch the large wire harness on the back. The instrument panel can now be removed. Remove the black panel on the back by loosening the clips.

How do you remove the odometer from a Chevy Blazer?

It is very simple, just remove the cluster and find a bad solder on the wire going to the odometer/gear selector display. (Most likely going to be the top wire/solder that is broken as shown in the video) This applies to 1998, 1999, 2000, 2001, 2002, 2003, and 2004 Chevy s10, Blazer, and Silverado trucks (Sonoma, Jimmy, Sierra).

A common fault on ’99 – ’02 GM trucks was the permanent or intermittent failing of the odometer/gear select LCD. This meant that you were unable to see what gear you were currently in, unable to determine the mileage of the vehicle, and unable to use the trip computer.

The instrument cluster is held in place by four (4) 7mm hex screws, one in each corner. Remove these. Tilt the instrument cluster forward carefully, and unlatch the large wire harness on the back. The instrument panel can now be removed. Remove the black panel on the back by loosening the clips.

What kind of air bags does GMC Sonoma have?

The 1998 GMC Sonoma has not been tested. The 1998 GMC Sonoma pickup truck, cousin to the Chevrolet S-10, comes withdual air bags to protect driver and passenger. It also comes with a passenger-side air-bag cutoff switch.

How do you repair an odometer on a car?

Lining up the pins of the stepper motors with their corresponding sockets on the PCB, push the board back onto the instrument cluster. Put pressure on the back of where the stepper motors are (see photo). Replace the back plastic cover of the instrument cluster, ensuring all clips are secured.

How do you find the odometer on a Volkswagen Polo?

Vehicles without menu display on the instrument cluster: Start the engine. Press button 3 times. The odometer in the instrument cluster display flashes. Press the button once. The vehicle speed in km/h or mph is shown briefly in the display instead of the odometer.

How does the gear change indicator work on a VW Polo?

Gear change indicator While the vehicle is in motion, the instrument cluster may show which gear should be selected to reduce fuel consumption . Second speed display (mph or km/h) In addition to the tachometer display, the speed can also be displayed in another unit of measurement (mph or km/h) while you are driving.

Why is my odometer and message center not working?

If both the odometer and message center are not working, the problem is likely to be a fuse (both of these displays share the same fuse.)

Where is the odometer located on a PRND321?

Carefully pry the board away from the instrument cluster – it is held in place only by the pins of the stepper motors (labelled on the image)… but BEWARE, there is another small wire harness on the right and side of the board. The last thing is to gain access to the back of the LCD panel.

What does DTE stand for in a car?

Numbers appear but I can’t correlate what they go to. Other than that, a great automobile so far. DTE stands for Due Till Empty, pretty much its telling you how many miles you have left before your tank is empty 58 people found this helpful. Duel Tack Eletrode,has to do with tackodometer,if the tack gets out of sink with the RPM,s,it will light up.

What is the DTE display on a Dodge Grand Caravan?

2012 Dodge Grand Caravan – What is the ‘DTE’ display? The electronic console shows the temperature, mpg, two trip odometers, total mileage, speed, etc. But, there is one entry labeled ‘DTE’ that is not explained in the manual. In fact, much of the manual doesn’t match my console at all.

What to do if you have a faulty odometer cluster?

If you have a faulty or damaged gauge cluster, we always recommend trying to repair the original as a first option. We have repair services available for a multitude of gauge clusters HERE. If the unit cannot be repaired, the next best option is to clone a replacement cluster from the original.

When did Odo pro start programing odometers?

We can program odometers on most gauge clusters and modules from 1992-2019. We have over 10 years of experience and we only use the best equipment and the latest software to ensure a quick, quality job!

Is the gauge cluster a point of failure?

The gauge cluster is one of the most complicated and delicate pieces of electronics in a vehicle having a multitude of gauges, displays and circuits. This combination of moving parts, displays and circuitry makes it a common point of failure in vehicles. It is also susceptible to fire and flood damage and theft.

If you have a faulty or damaged gauge cluster, we always recommend trying to repair the original as a first option. We have repair services available for a multitude of gauge clusters HERE. If the unit cannot be repaired, the next best option is to clone a replacement cluster from the original.

We can program odometers on most gauge clusters and modules from 1992-2019. We have over 10 years of experience and we only use the best equipment and the latest software to ensure a quick, quality job!

What is the code for replacing an odometer?

Here are a couple helpful links to information that will help you understand U.S. odometer laws regarding service and sale of vehicles: U.S. Code 49 U.S. Code § 32704. Service, repair, and replacement U.S. Code 49 U.S. Code § 32705.

The gauge cluster is one of the most complicated and delicate pieces of electronics in a vehicle having a multitude of gauges, displays and circuits. This combination of moving parts, displays and circuitry makes it a common point of failure in vehicles. It is also susceptible to fire and flood damage and theft.

Posted In Q&A