How to replace a headlight bulb on a Mitsubishi Mirage?
Swing open the metal retaining clip. Pull the old light bulb straight out of the socket. Try to avoid touching the glass part of the new halogen bulb with your fingers or anything greasy in the engine bay. If you do get the new bulb dirty, wipe it clean with a paper towel moistened with some rubbing alcohol.
Where is the marker light bulb on a mirage?
The Front Side Marker light bulb is located at the outer edge of the headlight housing. Rotate the small black plastic bulb socket 1/4 turn counterclockwise before pulling it straight out of the housing. Pull the old bulb straight out of the socket. Push a new number 2825 bulb straight in to the socket.
What kind of light bulb do I need for my Mirage?
Push a new number 2825 bulb straight in to the socket. If necessary, you can also use any other miniature wedge base bulbs such as the # 158, 168, W5W, 194 or a compatible LED unit.
What to do if your headlight is not working?
Replace headlight relay If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. I am the Professional Machine Engineer. This channel offers educational car service, repairs and tech info.
Swing open the metal retaining clip. Pull the old light bulb straight out of the socket. Try to avoid touching the glass part of the new halogen bulb with your fingers or anything greasy in the engine bay. If you do get the new bulb dirty, wipe it clean with a paper towel moistened with some rubbing alcohol.
How do you Change headlight bulbs on a Mitsubishi Outlander?
Flip the plastic radiator cover back over the front of the engine bay. Re-inset the four pop rivets and then push down the center of each fastener to secure them in place. To test the new bulbs, turn on the headlights, flash the high beams and activate the hazard signals.
When to replace a lamp in a Mitsubishi?
Contact a MITSUBISHI MOTORS Authorised Service Point when there is a need for repair or replacement. 1- Luggage room lamp: 8 W. 2- Room lamp (rear): 8 W. 3- Map & room lamps (front): 8 W. 4- Foot lamps: 1.4 W. 5- Centre console down light. 6- Lower glove box lamp: 1.4 W. ● An LED, not a bulb, is used in the centre console down light.
What kind of light bulb do I need for my Outlander Sport?
How to change a low beam, high beam, front turn signal or side marker light bulb in a 2011-2017 Outlander Sport.
How to change parking light in Mitsubishi Lancer?
When changing the parking light in your Lancer, be careful not to touch the glass part of the new bulb with your finger as this will cause it to burn out quicker. We recommend using gloves or a piece of paper towel to limit the potential of touching the bulb.
How do you replace a headlight bulb on a Mitsubishi Mirage?
The bulb is held in place with a metal clip, which is easy to remove but very difficult to reattach. There is also very little room, so it is hard to use your hand and see what you are doing at the same time. Have a look at the closeup in the video on how the clip has to be reattached. This should help to get the job done quicker.
How do you change the light bulb on a Mitsubishi Outlander?
Pry the cover off, releasing the retaining clips. Pull the existing bulb out of the socket. Push a new dome light bulb into the socket until it is secure. Line up the cover, starting on the edge opposite the indent. Press firmly until the cover snaps into place. “2007 Mitsubishi Outlander Factory Service Manual”; Mitsubishi Motors; 2006
Contact a MITSUBISHI MOTORS Authorised Service Point when there is a need for repair or replacement. 1- Luggage room lamp: 8 W. 2- Room lamp (rear): 8 W. 3- Map & room lamps (front): 8 W. 4- Foot lamps: 1.4 W. 5- Centre console down light. 6- Lower glove box lamp: 1.4 W. ● An LED, not a bulb, is used in the centre console down light.