How to replace CVVT solenoid for code p1332?

How to replace CVVT solenoid for code p1332?

The replacement that I got looks like this and does not just easily connect into the old system (thanks Volvo). 1. Change the oil (to start off this new solenoid with good fresh oil) and clear the CEL codes. 2. Remove timing belt cover, unplug and remove old solenoid and gasket with socket wrench, forgot exact size, I’m thinking 10mm.

Where is the CVVT solenoid on a V70XC?

I did this on my 2000 V70XC and your results may differ, so don’t blame me if you break something. The CVVT solenoid is located under the timing belt cover. Use a Torx wrench (size 25 or 30) to undo the two screws.

How to replace CVVT solenoid with crimp connector?

Take wire #1 that you marked earlier from the car and use the crimp connector to connect it to wire #1 from the new solenoid. Do the same for the #2 wires. Wrap the connections in heat resistant electrical tape (I also wrapped mine with some leftover silicon tubing from my vacuum lines).

How much does it cost to replace a CVVT solenoid?

The new solenoid is a bit tricky. The part (I got from dealer by-the-way; $140 – $20 core charge) comes with a small independant housing, two wires and two crimp connectors. It sort of makes sense how to put it together, but I ran into a problem here.

What are the OBD codes for a Volvo?

OBD, OBD II, VIDA, DiCE, VADIS. What is DiCE? What OBDII Scanner Should I Get? on What OBDII Scanner Should I Get? Need a VIDA/DiCE Vendor Recommendation? Here Are Several. on Need a VIDA/DiCE Vendor Recommendation? Here Are Several. Stage 0 and So Much More… Fix List for a V70 on Stage 0 and So Much More… Fix List for a V70 Throttle Body vs.

Where is the Diagnostic Code on a Volvo 850?

Regardless of your Volvo model, if it has an OBD-II port, you can plug in a code reader and read codes . OBD2 port Location Volvo 850. It’s under the coin tray. Don’t spend a lot on the reader.

What is the diagnostic trouble code for Volvo?

OBD II is a diagnostics system designed to meet statutory requirements. A standardized instrument for fault-tracing can be plugged in to the data link connector (DLC) (OBD II socket) to read diagnostic trouble codes (DTCs) and system parameters. Looking for 1995 to 1998 Volvo Trouble Code help?

What is the DTC code on a Volvo?

It cannot provide the comprehensive range of information available from the Volvo On-board diagnostics system. Volvo has its own diagnostic trouble code (DTC) designations that adhere to the in-house Volvo On-board Diagnostics protocol (called DII from model year 1999).

Is there an OBD code for Volvo XC90?

OBD II contains only emissions related diagnostic trouble codes (DTCs) and parameters. It cannot provide the comprehensive range of information available from the Volvo On-board diagnostics system.

Posted In Q&A