How to replace serpentine belt on Volvo C30 T5?

How to replace serpentine belt on Volvo C30 T5?

Video tutorial on how to replace the serpentine belts, along with tensioner removal, I will be replacing the alternators tension on a Volvo C30 T5. Similar procedure can also be found on the S40, V50, and C70 models. A slipping belt will squeal or chirp, this sound may come and ago and can be more noticeable during a morning dew or in the rain.

Where can I buy belt for Volvo S40?

Shop AutoZone for Volvo S40 Belt. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only

What’s the sound of a slipping belt on a Volvo?

Similar procedure can also be found on the S40, V50, and C70 models. A slipping belt will squeal or chirp, this sound may come and ago and can be more noticeable during a morning dew or in the rain. Depending on the severity, this can disappear once the vehicle warms up.

When to replace the timing belt on a Volvo T5?

Replacing the timing belt is one of the most important maintenance tasks for the five-cylinder Volvo T5 engine. As the engine ages and mileage climbs, an old, worn-out timing belt can possibly break, causing catastrophic engine damage.

What kind of tensioner does a Volvo C30 use?

The inner belt uses the same sort of tensioner as the outer belt. Insert the T50 Torx driver in the hole (green arrow) on the inner tensioner and turn it counter-clockwise to relieve the tension on the belt. Once loose, carefully remove the belt from the AC compressor, alternator and tensioner pulleys.

Do you need to lock the crankshaft on a Volvo T5?

Only rotate the engine clockwise. Shown here is a crankshaft lock for the Volvo T5 engine. Technically, you don’t need to lock the crankshaft to replace the timing belt, although it does provide a little piece of mind. Behind the starter is the access plug (green arrow) for the crankshaft lock.

Are there any problems with the 2005 Volvo S40?

See all problems of the 2005 Volvo S40 . Driving down the highway at 55 mph when instrument panel went completely blank I heard a sizzling noise behind the dash board. I lost the speedometer, gas gauge, light indicator, blinker indicators, all of the instruments you depend on while driving down the road.

What does idle throttle setting on Volvo S40 mean?

Idle throttle setting (eg stopped at lights) became unstable, occasionally revving upto to ~2000rpm. Moments later on suburban divided main street, throttle stuck at ~2200rpm which meant I was doing 45mph (straight line) without any pressure applied to gas pedal.

How did I Fix my Volvo S40 battery problem?

Towed home. Removed ignition key (was inserted to ensure steering was unlocked) but radiator cooling fan remained on (engine hadn’t run for 2. 5 hours by that time). Pulled a fuse under the hood to stop it dumping the battery.

How to replace the auxiliary belt and tensioner on Volvo?

Unbolt the top of the casing, on the wing and undo 3 clips (see picture). Last, pull out the cold air outlet. As you can see, still not quite enough room to get a 3/4″ breaker bar into the tensioner Pull the air outlet tube off where it connects to another pipe nearer the bulkhead. It just twists off.

What’s the torque setting on the aux belt?

I don’t know the real torque setting, Haynes didn’t say but 20Nm felt tight enough. Use the breaker bar again to move the tensioner until the locking pin can go in. Re-route the aux belt carefully, take the slack off the locking pin with the breaker bar and let it take up tension on the belt.

How much does it cost to replace timing belt on Volvo S40?

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Volvo S40 Timing Belt Replacement costs $611 on average. What is a timing belt and how does it work? An engine timing belt is a fiber reinforced, toothed drive belt manufactured using durable compounds such as highly saturated nitrile.

What’s the easiest way to replace a timing belt?

Next step would be removing the accessories belts which is very easy by releasing the tension from two seperate pulleys: Next step is to remove the 4 x10mm bolts on crank pulley and to remove 30mm crank pulley nut. I dont have air tools so I used infamous starter method.

What kind of oil does a Volvo use?

It had been squeaking for some time, and neither WD-40 nor 3-in-1 light oil was helping long-term. I found a new one listed on eBay as a Renault Laguna/Safrane part.

How do you replace a tensioner on a Volvo S60?

Now, route in the new tensioner up through the front passenger wheel well and set it into place. From up top, thread in the top tensioner bolt. Route the new belt onto the pulleys using the method shown in the below video. All other steps are the reverse of the removal steps indicated above.

Why is my Volvo S60 serpentine belt worn out?

Either serpentine belt wear which is identified by cracking belt rib, or t he bearing on the serpentine belt tensioner is worn out and noisy. Both of which can harm other parts on your Volvo if failure were to occur.

How is the serpentine belt in a Chev?

Pictures, diagrams of serpentine belt routing. 2.4L. Belt Diagram 3.4 DOHC Cam Engine Drive Belt Diag… 3.5L Engine Serpentine Belt in Chev… 4.2L Inline Six Cylinder Engine Bel… 3800 V6 Belt Routing Picture and Ro…

When to replace O’Reilly serpentine belt tensioner?

Replacing the belt and tensioner may solve these problems. If there are cracks and other signs of wear on the belt, it may also be time to replace the serpentine belt. O’Reilly Auto Parts carries serpentine belts, tensioners, and all the parts you need for your complete repair.

What kind of belt does a 3800 V6 use?

3800 V6 Belt Routing Picture and Ro… Supercharged 3.8L V6 Drive Belt rou… Vortec 5.3 and 4.8L V8 Truck Belt R…

Posted In Q&A