How to replace the headlight on a Chevy Silverado?
Here is how to replace the headlights on a 88-98 Chevrolet truck. In this video I replace the headlight and turn signal housings on my Chevrolet Silverado pickup truck. This is an easy job to do. If you just want to change the headlight bulb on your truck, just take out the two top bolts and pull the headlight forward.
How do you remove a headlight from a Cavalier?
Remove the two bolts mounting the headlight assembly to the vehicle. As the Cavalier manual does not specify the bolt size, keep a socket wrench set handy and match up the bolt a socket head to find the correct size. Lift the assembly up and forward to access the rear. Turn the protective cover counterclockwise to remove it.
How to Change headlight bulbs 88-98 GMC Sierra?
(Playback ID: 1uoOFrNp8r4C6zjv) An error occurred while retrieving sharing information. Please try again later.
What’s the best way to replace a headlight bulb?
Insert the new bulb; make sure it snaps in. Reattach the connection and tighten the protective cover. Set the assembly back into place and tighten the bolts. Repeat the procedure if you want to replace both headlight bulbs. When you are finished, set the plastic shield in place and insert the fasteners to secure it.
Here is how to replace the headlights on a 88-98 Chevrolet truck. In this video I replace the headlight and turn signal housings on my Chevrolet Silverado pickup truck. This is an easy job to do. If you just want to change the headlight bulb on your truck, just take out the two top bolts and pull the headlight forward.
Remove the two bolts mounting the headlight assembly to the vehicle. As the Cavalier manual does not specify the bolt size, keep a socket wrench set handy and match up the bolt a socket head to find the correct size. Lift the assembly up and forward to access the rear. Turn the protective cover counterclockwise to remove it.
Where are the bulbs in a Chevy Silverado?
The bulbs are located in a composite headlight assembly with the high beam bulb being the inboard bulb in the assembly. If your Silverado has a high and low beam out, replacement of both bulbs is required. You should always replace the bulbs in pairs, ensuring the light coming from the headlights is balanced and even.
(Playback ID: 1uoOFrNp8r4C6zjv) An error occurred while retrieving sharing information. Please try again later.
How to adjust headlights on a GMC Truck?
Here is how to adjust the headlights on a GMC, Chevrolet, General Motors truck. This will work on the trucks built from 1988 to 1998. Adjusting headlight on a GM truck is easy if you have the right tool. There are two little bolts that you can reach through holes and turn to raise the headlights up and down, or to move it from left to right.
How to test a 1995 GM headlight switch?
OEM (Original Engine Management) Part # HLS24. Wells Part # SW932. If this headlight switch tutorial does not apply to your GM pickup or SUV, there’s one more headlight switch tutorial for 1995 or newer GM pickups that you can find here: How To Test The Headlight Switch (4.3L, 5.0L, 5.7L). Contents of this tutorial:
What kind of headlight switch do I Need?
To help you make sure this article applies to your specific Chevrolet or GMC pickup or SUV, this article will help you test the following headlight switch part #’s: AutoZone Duralast Part # SW932. AC Delco Part # D1561D. AirTex, Wells Part # 1S4760. Standard Motor Products Part # DS647T. Standard Motor Products Part # DS647.