How to reset GMC Yukon light oil change Minder?
Turn the ignition key to position “ON” without starting the engine, If your GMC Yukon has push-button start, press the “Start” button twice without touching the brake pedal. Fully press and release the accelerator pedal three times within five seconds.
How to reset your Chevy or GMC oil change light?
Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.
Is there a way to reset the oil light?
Once the odometer is showing the total driven mileage, turn off the ignition. Place your finger on the reset button, then press and hold. While holding, turn on the ignition again. As you hold the reset button, the change oil light should start blinking. Let the light blink for a couple of seconds before you release the reset button.
When does the oil change light come on?
The oil change light is triggered when the vehicle has counted down the expected life of your oil to zero. If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service.
How to reset the oil light on a GMC Yukon?
GMC Yukon Change Engine Oil Light Reset Procedures: 2003-2015. Turn ignition switch to ON position with engine off. Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key. Change Oil lamp will flash for 2-10 seconds while it resets.
How to reset the change engine oil light?
GMC Yukon Change Engine Oil Light Reset Procedures: 1 Display the “Oil Life Remaining” message in the Driver Information Center 2 Press and hold the SET/RESET button on the Driver Information Center for more than 5 seconds (on vehicles without DIC, use the TRIP reset stem for SET/RESET) 3 The oil life will change to “100%”
How do you reset the oil light on a Honda Accord?
While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.
Is there an oil change light on my GMC?
Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.