Is the service airbag light on on a Chevy Silverado?
I have a 2003 Silverado and the airbag light is on and service airbag on the dash stays on. Can you help? If so would it Chevrolet Repair Questions? Ask a Chevy Mechanic for Answers ASAP
When does the GM airbag light come on?
The airbag light, or SRS (supplemental restraint system) light, on the GM dashboard shines whenever there is a malfunction with the airbag deployment system. The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag.
What are the warning lights on a Chevy Silverado?
Description: High engine coolant temperature warning may be indicated by the coolant temperature gauge, a warning light or warning message. For the coolant temperature gauge, it may display temperatures in Fahrenheit or Celsius. If the needle on the temperature gauge moves into the red area, immediately pull off the road and switch off the engine.
What to do when your dashboard light goes off on a Chevy Silverado?
Immediately stop the vehicle and switch off the engine if driving. Wait a few minutes for the oil to drain into the pan. Check engine oil level. If the engine oil level is within the acceptable level range, do not restart the engine and arrange to have the vehicle towed.
What is the service airbag light on on a 2003 Silverado?
I have a 2003 Silverado and the airbag light is on and service airbag on the dash stays on. Can you help? If so would it be the bumper sensors or the sensor in the steering column. Experience: GM Grand Master Technician 2007. 14 years experience. Welcome.
How much does it cost to reset an airbag light on a Chevy Silverado?
It can cost between $170 to $190 have a defective sensor replaced, this includes labor costs. Before takeng the Silverado to the shop, check the supplemental restraint system fuses and replace them as needed. To reset an airbag on a silverado just put the key into the ignition and turn the switch to the on. Watch for the airbag light to turn on.
The airbag light, or SRS (supplemental restraint system) light, on the GM dashboard shines whenever there is a malfunction with the airbag deployment system. The vehicle needs inspected and fixed to ensure against accidental deployment of the airbag.
Description: High engine coolant temperature warning may be indicated by the coolant temperature gauge, a warning light or warning message. For the coolant temperature gauge, it may display temperatures in Fahrenheit or Celsius. If the needle on the temperature gauge moves into the red area, immediately pull off the road and switch off the engine.
What to do when your airbag light comes back on?
After you clear the Chevrolet airbag light, turn off the ignition then back on to determine if the airbag light has been reset. Go back to the Airbag / SRS control unit. Scroll down to Clear / Erase Fault Codes and press enter. If the problem hasn’t been fixed, the airbag light will come back immediately or as soon as the problem is detected again.
Where is the airbag code on a 1996 Chevy?
If you use a generic OBD-II scanner, it will show no fault codes, even though airbag codes are present and the airbag light is on. Under your Chevrolet dashboard, you will find the Onboard Diagnostic port, also known as the OBD-II port. Your browser does not support the video tag. All 1996 and newer Chevrolet have this port.
What is the code for the airbag light?
If not, then you need to get the codes read and we can trace it down from there. The code is B0100EFSI communication malfunction.. The light does not flash at all after starting th evehicle the airbag light in the left corner comes on the service airbag is lite where the odometer reading is and stays on unless I switch to reading the odometer..
Why does the airbag light stay on in my Chevy?
If your Chevrolet airbag light stays on and won’t turn off, it is because the Safety Restraint System (SRS) has detected a problem with one of the airbag components. Two possibilities include damaged wires or low voltage. While the airbag light stays on, the SRS system will not function, and no airbag will deploy in case of an accident.
How do I reset airbag light on Chevy Silverado?
To reset the airbag light in a Chevy Silverado You need to have the truck diagnosed using a computerized scan tool. There are numerous reasons that would cause the light to illuminate. The scan tool will plug into the OBD-II Port and will let You know where the issues are.
How to fix the service airbag light on a GMC Sierra?
To fix this error – you need to disconnect both batteries, drop the skid plate, and replace the Front Impact sensor. The sensor was $65 on Amazon. Thanks everyone for all of your support! Send me stuff! The Tools I Use: https://www.amazon.com/shop/bonecrrus… Loading…
After you clear the Chevrolet airbag light, turn off the ignition then back on to determine if the airbag light has been reset. Go back to the Airbag / SRS control unit. Scroll down to Clear / Erase Fault Codes and press enter. If the problem hasn’t been fixed, the airbag light will come back immediately or as soon as the problem is detected again.