Is there a valet switch?
Typical locations for valet switch: Under the driver’s side dash (mounted in the under-dash covering trim panel or wire-tied to a harness) Mounted in the driver’s side kick panel. The valet switch is on this antenna.
What does a valet key do on a Honda Accord?
The valet key works only in the ignition and the door locks. You can keep the glove box locked when you leave your vehicle and the valet key at a parking facility. These keys contain electronic circuits that are activated by the Immobilizer System.
Where is the valet switch on a car?
Typical locations for valet switch: Under the driver’s side dash (mounted in the under-dash covering trim panel or wire-tied to a harness) Mounted in the driver’s side kick panel. Mounted in the steering column plastic housing.
Where is the main switch on a Honda Accord?
The trunk main switch disables the trunk release button on the remote transmitter and the trunk release button on the trunk lid to protect luggage in the trunk. 1. Make sure the rear seat-back is not folded down. 2. Turn off the trunk main switch in the glove box.
Where are the sensors on a Honda Accord?
Fuel Tank Pressure Sensor Air Temperature Sensor ( Ambient / Intake 1 Manifold Pressure/Vacuum Sensor Power Steering Pressure Switch Throttle Position Sensor Transmission Position Sensor/Switch Variable Valve Timing Actuator Position Sensor Variable Valve Timing Pressure Switch Camshaft Position Sensor Crankshaft Position Sensor
Where can I get a new valet button?
If you bought a used car that has a valet switch or button most likely you can order a new remote. Look under the dash for a plastic box (the receiver or brain of the system) and use the Brand and Model name printed on it to search for the correct replacement aftermarket key fob remote transmitter.
How to use the Honda valet security system?
Valet (Auto Arming Mode only) With the system in the Valet mode and the key out of the ignition switch. Steps from 2 to 4 must be completed within 3 seconds. Press the “LOCK” button on the remote control transmitter. You will observe the following. • The remote control LED illuminates. • The security system arms.
How do you turn off the valet button?
1. Enter the vehicle & insert then turn the ignition key to the ON position. 2. On systems from the late 1990s and newer, using trial and error, press & hold the valet button 1-5 times for a second each time. On systems from the mid 1990s and earlier, turn the valet toggle switch to the off position.
Which is the override button on a valet switch?
In those cases the button is the valet button (also known as override button or programming button.) Also, it’s good to know that on the toggle switch style valet switches, the position which has a small notch in the metal is the OFF position. Why do you need a valet mode?
When do I need to disarm the valet key?
Valet parking, a mechanic at your local repair shop are examples of times when you want to have your car disarmed so you don’t have to hand over the expensive remote, just the key. You wouldn’t want to face the inconvenienbce if they lose or damage it.