What are the lines on a transmission cooler?
Barb to Barb – Used to connect two rubber lines together. These fittings are common for when you install a transmission cooler and keep the existing rubber lines on the vehicle. This type of fitting is found on both the transmission and radiator where there is a pre bent transmission line.
What to do if your transmission cooler is leaking?
Help! Transmission Cooler line leaking? – YouTube Help! Transmission Cooler line leaking? If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
Where can I install an aftermarket Trans cooler?
When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler. These fittings are very cost effective and are typically only a few dollars at most and comes in packs with multiple fittings.
Why do transmission lines need to be replaced?
Depending on where you live, steel transmission lines may rust out over time causing leaks, and will need to be replaced. Depending on your vehicle, these may be very straight forward to replace, or can be a pain due to the space and the bends in the lines.
Barb to Barb – Used to connect two rubber lines together. These fittings are common for when you install a transmission cooler and keep the existing rubber lines on the vehicle. This type of fitting is found on both the transmission and radiator where there is a pre bent transmission line.
Help! Transmission Cooler line leaking? – YouTube Help! Transmission Cooler line leaking? If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler. These fittings are very cost effective and are typically only a few dollars at most and comes in packs with multiple fittings.
How long does it take to get transmission cooling lines on Amazon?
Only 2 left in stock (more on the way). . Only 10 left in stock (more on the way). . . Only 1 left in stock – order soon. . Usually ships within 2 to 3 days.
What are the fittings for a JEGS transmission cooler?
JEGS High Performance Transmission Coole… JEGS Brass Hose Adapter for 3/8 in. to 5… JEGS Transmission Fittings 1/8 in. NPSM JEGS High Performance Transmission Coole… JEGS Inverted Flare Steel Tube Nuts for …
Why do you need a transmission cooler in your car?
High performance applications like towing and high torque engines can build heat in the transmission and break down fluids. Transmission fluid works best at lower temperatures. Cool off your Ford, GM, Mopar and other vehicles with an add on transmission cooler.
Where is the lower transmission cooler line located?
Lower transmission cooler line. This hose worked perfect. Do yourself a favor and buy the clips that hold it in place. The one on the radiator side is easy to keep track of, but you will for sure lose the one above the transmission. This hose is really difficult to install because you have to feed it under and through the undercarriage of the car.
How to install a GMC Sierra transmission oil cooler?
Use the fitment form at the top of the page to select your exact year and engine type for your GMC Sierra 1500. Includes nylon rods, foam pads and locking buttons for simple installation of Imperial electric fans and transmission oil coolers.
Is there recall on GMC transmission cooler lines?
GM has recalled the trans lines for leaking! I got a letter a bunch of months back for inspection and replacement of the lines. My 06 had leaking at the crimps awhile back. I ended up replacing them using a hydraulic hose setup. Here’s my thread, with the nightmare it was due to choosing the wrong shop at first:
How to remove cooler lines without a quick disconnect tool?
Disconnecting a transmission cooler line without a quick disconnect tool is a fairly simple task provided you have the proper tools. Disconnecting a cooler line while it is attached usually destroys the line itself, because a removal of the cooler line fitting is required. Step 1 Identify cooler line location.
How do you remove transmission lines?
Remove the two transmission cooler lines from the bottom of the radiator . These two lines can be accessed either from underneath the hood or underneath the vehicle. Use the flare nut wrench to remove the lines in the same manner used to remove the lines from the transmission.
What is a transmission cooling line?
What is a transmission cooling line? Your transmission cooling lines, often just called the transmission lines, are the lines that connect your transmission to the radiator in your car. The hot fluid cools off in the radiator and then heads back to the transmission.
What is a transmission cooler leak?
Transmission Harsh Shift. A leak in the transmission hydraulic lines that travel to the transmission cooler can empty a transmission of fluid at a slow to even dramatic rate depending on the size of the leak. Any automatic transmission that looses or has less fluid than it needs to run properly will most likely be coupled with…
How to build a custom coolant line kit?
Build a custom 3/4″ system to deliver coolant, cutting oil, water, or air in any direction. Kit contains lengths of hose, nozzles, connectors, and assembly pliers. Use with Loc-Line hose to assemble and disassemble components. Use with Snap-Loc hose to assemble and disassemble components.
Can a flexible coolant line be used in cold weather?
Cold temperatures pose no problems for this tubing— it stays strong and flexible, even when temperatures drop to -100° F. Use this resilient tubing in high-temperature chemical applications up to 400° F. With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
How does a McMaster flexible coolant line work?
Swivel the ball-socket connections to position these arms and then lock them in place. With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.
Why are transmission cooler lines made of nylon?
Nylon braided transmission cooler lines, like their name indicates, are rubber lines encased in a protective nylon cover. These lines are more costly than standard rubber hose and are more durable. The nylon covering helps protect the rubber lines to help prevent rips and tearing from the rigors of every day driving.
Build a custom 3/4″ system to deliver coolant, cutting oil, water, or air in any direction. Kit contains lengths of hose, nozzles, connectors, and assembly pliers. Use with Loc-Line hose to assemble and disassemble components. Use with Snap-Loc hose to assemble and disassemble components.
Cold temperatures pose no problems for this tubing— it stays strong and flexible, even when temperatures drop to -100° F. Use this resilient tubing in high-temperature chemical applications up to 400° F. With excellent resistance to abrasion and tearing, this tubing can hold up in rugged environments.
What are the fittings for a transmission cooler?
These fittings are a push fit type that allow for a standard hose clamp to keep the transmission line in place. When it comes to installing an aftermarket trans cooler, barb fittings can be used on the radiator transmission fluid outlet for rubber hose to run to the cooler.