What causes water to spray the power steering pump?
There is no missing shield/splash guard. Where the power steering pump is located in relationship to the right front tire causes water to spray the power steering pump. If the serpentine belt is worn water gets between the serpentine belt and the power steering pump pulley.
How can you tell if your power steering pump is failing?
Steering Wheel Slow to Respond or Stiff While turning a corner, if your steering feels slow to respond to the steering wheel inputs you are making, chances are your power steering pump is failing, especially if accompanied by a whining noise. The steering wheel may also feel stiff when turning — another indication of a power steering pump failure.
Can a power steering belt slip during rain?
@keith: I have had a power steering belt slip many times with no screeching–when the belt is loose and well saturated with water, it can slip with no noticeable noise whatsoever.
What kind of pressure does a power steering pump need?
The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more.
How to remove timing belt and water pump?
To access the timing belt cover and related components, the cover needs to come off. There should be four 10mm bolts and one 12mm bolt. Then, you will need to remove the timing cover. Using the socket wrench, remove bolts. Then, you will need to remove the timing cover to access the belt and water pump. Figure 4. Valve cover removal diagram.
How do you change timing belt on Honda Civic?
Open the coolant cap on top of the radiator. Turn the petcock at the bottom of the radiator to drain the coolant into drain pan. Squeeze the rubber radiator hoses to remove any excess fluid that may be trapped. Figure 3. Radiator being drained. To access the timing belt cover and related components, the cover needs to come off.
How many bolts do you need for a timing belt?
There should be four 10mm bolts and one 12mm bolt. Then, you will need to remove the timing cover. Using the socket wrench, remove bolts. Then, you will need to remove the timing cover to access the belt and water pump. Figure 4. Valve cover removal diagram. Figure 5. Timing belt assembly.
How do you replace the water pump on a Honda Civic?
Because the water pump will be replaced, it’s important to clear the system of the old coolant. Open the coolant cap on top of the radiator. Turn the petcock at the bottom of the radiator to drain the coolant into drain pan. Squeeze the rubber radiator hoses to remove any excess fluid that may be trapped.