What engine code is P0102?
P0102 is the general code for a problem with the Mass Airflow (MAF) Sensor having a low voltage output to the Engine Control Unit (ECU).
What does the GMC code p0102 mean?
P0102 GMC Meaning The Mass Air Flow (MAF) sensor measures the amount of air ingested by the engine. The direct measurement of the air entering the engine is more accurate than calculating the airflow from the Manifold Absulte Pressure (MAP), the Intake Air Temperature (IAT), and the engine speed (speed/density).
What does p0102 mean on the MAF sensor?
The Mass Airflow (MAF) sensor measures the amount of air entering the engine. When code P0102 is set, there is a low voltage output to the ECM, PCM, or ECU depending on your car type (check your owner’s manual for your specific car). P0102 Symptoms
What to do if your Mercedes has a code of p0100?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle.
Where is the trouble code on a GMC?
When retrieving GMC trouble codes with an OBD II scan tool, proceed as follows: 1. Connect scan tool to the 16-pin data link connector (DLC) located underneath the steering column. The connector may have a removable cover. 2. Turn the ignition on.
P0102 GMC Meaning The Mass Air Flow (MAF) sensor measures the amount of air ingested by the engine. The direct measurement of the air entering the engine is more accurate than calculating the airflow from the Manifold Absulte Pressure (MAP), the Intake Air Temperature (IAT), and the engine speed (speed/density).
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compress air or mass air flow sensor cleaner. Reset code and drive vehicle.
The Mass Airflow (MAF) sensor measures the amount of air entering the engine. When code P0102 is set, there is a low voltage output to the ECM, PCM, or ECU depending on your car type (check your owner’s manual for your specific car). P0102 Symptoms
When to use DTC p0101 or p0102?
The PCM compares the actual MAF sensor signal to the predicted MAF value in order to determine if the signal is stuck based on a lack of variation, or is too low or too high for a given operating condition. DTC P0101 will set if the actual MAF sensor signal is not within a predetermined range of the calculated MAF value.