What is a fuel switch?
Fuel switching refers to a generator’s ability to completely but temporarily replace one generation fuel source with another. For most fuel-switching generators in the United States, the primary energy source is natural gas and the secondary fuel is distillate fuel oil or residual fuel oil.
How does a fuel switch work?
The fuel flows from the tank into the float chamber through the needle valve. When the fuel rises to a specific level, the float rises. When the buoyancy of the float is balanced with the fuel pressure, the needle valve shuts off the fuel passage, thereby maintaining the fuel at the predetermined level.
What does a fuel cut off switch do?
The fuel pump shut off switch is an electrical switch that is found on certain vehicles equipped with internal combustion engines. Commonly referred to as the inertia switch, the fuel pump shut off switch is designed to shut off the fuel pump when it is detected that the vehicle has come to an unusually sudden, or forceful stop .
Is there a fuel shut-off switch?
Steps to Locate and Reset Fuel Cut Off Switch on Ford Fiesta (For Other Cars Keep Reading) First, open the glove compartment Pull out the glove compartment by firmly pressing the left side toward an inner section Look for a device with a rubber yellow cap on it Push the rubber yellow cap on inertia switch
What is a fuel inertia switch?
Commonly referred to as the inertia switch, the fuel pump shut off switch is designed to shut off the fuel pump when it is detected that the vehicle has come to an unusually sudden, or forceful stop.
Where is the fuel pump reset button?
Locate the reset button to the fuel pump shut off switch. Press and hold the reset button for about 20 seconds. Note: The fuel pump shut off switch reset button is usually located either under the dash in the driver compartment or under the driver or passenger seat.