What is Ni200 coil?
The nickel (Ni-200) temperature control atomizer coils for the Aspire’s Triton & Atlantis series tanks. These devices, coupled with the Ni200 atomizer heads, can control the temperature of the actual wire itself, making for an ultimate vaping experience. Feature a 0.15 ohm Resistance and are coded with a red gasket.
What gauge wire is best for vaping?
Kanthal has been the choice of most vapers for a longer time, due to its ease of use and higher resistance. Mouth to lung vapers appreciate their higher builds, and a 26-28 gauge Kanthal wire is always dependable—and hard to swap for anything else.
What is Kanthal mesh?
Kanthal D FeCrAl alloy wire mesh is a ferritic iron-chromium-aluminium (FeCrAl) alloy used primarily in electrical resistance heating elements, and other high-temperature settings, up to 2370°F. Excellent oxidation resistance and high resistivity. Good resistance to sulfur and carburizing settings.
What is a kanthal coil?
Kanthal is a mix of iron, chromium, and aluminium. It gives a high, stable resistance and a great durability in time – a slightly longer lifespan than other wirings. Clapton coils are usually made from Kanthal and it’s all about the style of the coil winding.
Is kanthal good for flavour?
As well as the wicking material, the other part of your atomizer that’s closely involved in the vaping process is your wire. Thankfully for flavour-chasing vapers, Kanthal is still the most widely-used coil material and it gives a clean, natural flavour from your juice.
Is the ni200 coil wire pliable or moldable?
While it was the preferred wire among some sub ohm coil builders, due to the fast ramp up of heat, it is not the Ni200 coil wire used in many sub-ohm prebuilt coil heads. With a heat resistance of 2624: Fahrenheit, Ni200 wire is pliable and easily moldable. It is a metal alloy that has awesome thermal and electrical properties.
Is the 26 gauge coil too thin for resistance?
Unless you like extreme heat, or have a VW device where you can run less than the Ohm’s law parity value of 59 watts… 26 gauge is too thin for the resistance. The heat flux for a 26 gauge dual parallel, 0.3Ω net resistance build at 59 watts is a hot 435 mW/mm².
How many Watts Does a 26 gauge coil draw?
If all you have is 26 gauge, either increase the net resistance slightly to reduce OL parity wattage, reduce wattage below Ohm’s law if you have a VW mod, or go with a thicker wire. A 0.4Ω build with 26 will draw 44 watts at 4.2v and provide a heat flux of 243 mW/mm².
What is the heat flux of a 26 gauge coil?
The heat flux for a 26 gauge dual parallel, 0.3Ω net resistance build at 59 watts is a hot 435 mW/mm². If all you have is 26 gauge, either increase the net resistance slightly to reduce OL parity wattage, reduce wattage below Ohm’s law if you have a VW mod, or go with a thicker wire.