What should I know about priming a diesel engine?

What should I know about priming a diesel engine?

A general look at priming a Diesel engine. Running out of fuel road side, or just sitting for a long time – this will give you a basic idea on what you can do to save time and battery life. In the event that there are other issues present, then this procedure is certainly one of the first to use in the troubleshooting process. Loading…

What kind of diesel does a Sierra 2500HD have?

2001 2500HD Sierra w/6.6L Duramax diesel. Sometimes, not often, once a month or so my truck at start up won’t fire, just turns over. I have to go under the hood and pump up my diesel fuel system – located on the passenger side of the engine.

What to do if your 6.6L diesel loses fuel Prime?

Make sure you have already primed the system so that you can see the leak sooner. Seal the opening around the shopvac hose with a rag while you pressurise it. Once youve built pressure look for leaks. It’s probably your filter head seals. You can get a rebuild kit from MerchantAuto for less than 50 bucks.

How do you Prime a Duramax diesel fuel filter?

Prime the new fuel filter by pushing in on the black primer cap on top of the fuel filter until the diesel starts to run out of the relief valve. Close the relief valve. Turn the ignition to the accessory position for about 15 seconds. Crank the engine. Inspect the new fuel filter for any diesel leaks. Turn the engine off.

2001 2500HD Sierra w/6.6L Duramax diesel. Sometimes, not often, once a month or so my truck at start up won’t fire, just turns over. I have to go under the hood and pump up my diesel fuel system – located on the passenger side of the engine.

A general look at priming a Diesel engine. Running out of fuel road side, or just sitting for a long time – this will give you a basic idea on what you can do to save time and battery life. In the event that there are other issues present, then this procedure is certainly one of the first to use in the troubleshooting process. Loading…

Make sure you have already primed the system so that you can see the leak sooner. Seal the opening around the shopvac hose with a rag while you pressurise it. Once youve built pressure look for leaks. It’s probably your filter head seals. You can get a rebuild kit from MerchantAuto for less than 50 bucks.

Prime the new fuel filter by pushing in on the black primer cap on top of the fuel filter until the diesel starts to run out of the relief valve. Close the relief valve. Turn the ignition to the accessory position for about 15 seconds. Crank the engine. Inspect the new fuel filter for any diesel leaks. Turn the engine off.

Posted In Q&A