What to do if your VSA engine light comes on?
It clears up without any corrective action or adjustment but in a short time will happen again. Car will not downshift, brakes will start normally then firmly. Stop shut it off, restart VSA light off but engine light remains on problem will reoccur.
Why is the VSA light coming on on my Honda Accord?
Shutting the vehicle off, then back on, resets the solenoid. The VSA issue may be as simple as a wheel speed sensor, but you will need the Honda-specific codes for the VSA system to determine that.
What does it mean when your check engine light comes on?
The check engine light provides an idea — sometimes precise, sometimes vague — of what’s wrong with a car. However, it does not replace a skilled mechanic or routine maintenance. In other words, don’t wait until the check engine light comes on to get your car maintenance done.
Why is the VSA and check engine light coming on?
When both the check engine light and the VSA light are illuminated it means that the computer has detected there may be a fault in the system. Have a technician diagnose why the Check Engine Light is on and pull the diagnostic codes from the cars computer in order to find out more about what is going on.
When does the VSA system indicator come on?
VSA System Indicator The VSA system indicator (see page 56 ) comes on and stays on when there is a problem with the VSA system. If the VSA indicator comes on while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the VSA system indicator.
What happens when VSA is activated on your car?
When VSA activates, you may notice that the engine does not respond to the accelerator in the same way it does at other times. You will also see the VSA Activation Indicator blink. For a technical description of the Vehicle Stability Assist System, see page 300.
What to do if your VSA does not come on?
If the indicator remains on, or comes back on while driving, have the VSA system inspected by your Acura dealer. If the indicator does not come on when the ignition switch is turned ON (II), there may be a problem with the VSA system. Have your dealer inspect your car as soon as possible.