What to do when your GMC Yukon makes a noise?
If you want to test if this is the noise, than let your engine get nice and warm to were you hear that noise than bring your rpm up to about 2500 rpm (in park) and hold it. depending on the outside temp the noise should go away as the radiator gets cooled off and the fan clutch releases.
Are there any problems with the GMC Yukon?
GMC Yukon owners have reported 13 problems related to engine clicking and tapping noises (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of GMC Yukon based on all problems reported for the Yukon.
How long does the GMC Yukon engine ticking last?
Engine ticking on startup, lasts for 5 minutes currently – longer on cold starts or after letting the car sit overnight. Progressively has gotten louder and longer in duration since reporting the failure last year to the dealership.
Is the GMC Yukon sear seat still broken?
The vehicle was returned to the dealer who claimed that the seat is broken and that all the 2006 Yukon denali seat are broken. The sear was taken apart and longer bolts were used to secured the seat. The seat is still broken.
If you want to test if this is the noise, than let your engine get nice and warm to were you hear that noise than bring your rpm up to about 2500 rpm (in park) and hold it. depending on the outside temp the noise should go away as the radiator gets cooled off and the fan clutch releases.
Why does my steering wheel make a knocking noise when I turn?
If you have worn out tie rod ends, then knocking noises will start coming from the tie rod ends each time you turn the wheel. Shocks are what help absorb the vibrations and bumpiness that comes from driving.
What causes clunking noise in front suspension?
Clunking Noises From the Front Suspension One of the most common symptoms of a problem with suspension ball joints is clunking noises coming from the vehicle’s front suspension. As ball joints wear out they become loose in the socket and rattle and knock as the suspension travels up and down over the road.
Why does my steering wheel wander to the right?
Worn ball joints will cause the vehicle steering to wander to the left or right, which will require the driver to compensate for the issue. Because ball joints are an important component of any vehicle’s suspension.
GMC Yukon owners have reported 13 problems related to engine clicking and tapping noises (under the engine and engine cooling category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of GMC Yukon based on all problems reported for the Yukon.
Why does my GMC Jimmy make a clicking sound?
Googled it cuz a friend of mine has a GMC Jimmy with the same problem. It looks like the issue is a “blend door actuator” read on: I have a 1994 Chevy C-1500 that is making a clicking sound behind the glove box area,what might that be?
Engine ticking on startup, lasts for 5 minutes currently – longer on cold starts or after letting the car sit overnight. Progressively has gotten louder and longer in duration since reporting the failure last year to the dealership.
Why does my GMC Yukon make a clicking noise?
This piston “slap” noise described appears to be manufacturer defect in 5. 3 liter engine where shipment of engines with cylinder heads that are oversized or pistons shipping as undersized is causing warping on piston head, hence the reason why the noise progressivly gets louder and longer lasting as time progresses.
Why does my a / C rattle when I accelerate?
Please discard Corporate Bulletin Number 03-01-38-019 (Section 01 — HVAC). Some customers may comment about an underhood rattle noise heard on acceleration or a sudden loss of A/C system performance. This condition may be caused by liquid slugging of the A/C compressor.
Why does my Chevy Silverado make a clicking noise?
I have the same clicking noise on a 2005 with a 5.3. The stethoscope tells me it is inside the oil pan near the back. It is directly related to RPM. Oil pressure is fine and I drive it everyday but the noise is irritating 84 people found this helpful. Guys! Ive had the same problem for quite a while.
What is the owner manual for a GMC Yukon XL?
GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./ Canada/Mexico-9955936) – 2017 – crc – 7/5/16 Introduction 3 {Danger Danger indicates a hazard with a high level of risk which will result in serious injury or death.
When did the GMC Yukon XL Denali start?
“GMC Yukon XL Denali” redirects here. It is not to be confused with GMC Denali. The Chevrolet Suburban is a full-size SUV from Chevrolet. The name started in 1934 for the 1935 U.S. model year, making it the longest continuously used automobile nameplate in production.
What kind of engine does GMC Yukon XL have?
This engine is rated at 352 hp and 383 pounds-feet of torque. All 5.3-liter and 6.0-liter V-8s team with a four-speed automatic transmission, except on the Yukon XL 2500. Its 6.0-liter V-8 drives a six-speed automatic transmission for 2008. When properly equipped, the Yukon XL 1500 can tow up to 8,100 pounds.
Which is better GMC Yukon XL or Denali?
GMC’s Yukon XL Denali has a higher expected retail value than the standard XL. The Yukon XL — especially in Denali form — is a refined, if flamboyantly oversized, family and cargo hauler.
How many seats does a GMC Yukon XL have?
With space for up to nine occupants, depending upon the seating configurations for the individual rows, the 2008 GMC Yukon XL delivers great passenger comfort in a spacious interior. A lower-positioned instrument panel helps add leg space, front seats gain fore-and-aft and recline travel and second-row seats recline further, too.